Blogs

JST SAN 2.0mm connector complete system — white NP-SAN board-in housings in 5-pin and 8-pin configurations with black wire assemblies, SAN-002T-0.8A and SAN-002T-0.8K crimp terminals on carrier strip, grey background, Keszoox

JST SAN 2.0mm Connector: Complete Guide to Spec...

The definitive JST SAN 2.0mm connector guide — board-in crimp design, full specs, 2P-SAN to 15P-SAN housing part numbers, A-type vs B-type terminal differences for 1.2mm and 1.6mm PCB thickness,...

JST SAN 2.0mm Connector: Complete Guide to Spec...

The definitive JST SAN 2.0mm connector guide — board-in crimp design, full specs, 2P-SAN to 15P-SAN housing part numbers, A-type vs B-type terminal differences for 1.2mm and 1.6mm PCB thickness,...

JST PA 2.0mm connector complete system — beige B-PA through-hole PCB headers in multiple pin counts, PAP plug housings with green cable assemblies, and SPAL crimp terminals on carrier strip, Keszoox

JST PA 2.0mm Connector: Complete Guide to Wire-...

The definitive JST PA 2.0mm connector guide — why PA means Wire-to-Wire (not Wire-to-Board), complete part numbers PAP/SPAL/B-PA, all pin configurations 2–15, RC battery pigtail wiring, PA vs PH comparison,...

JST PA 2.0mm Connector: Complete Guide to Wire-...

The definitive JST PA 2.0mm connector guide — why PA means Wire-to-Wire (not Wire-to-Board), complete part numbers PAP/SPAL/B-PA, all pin configurations 2–15, RC battery pigtail wiring, PA vs PH comparison,...

JST ZH 1.5mm connector complete system — B-ZH SMD through-hole PCB headers in beige, ZHR white wire housings with blue cable assemblies, and SZH crimp terminals on carrier strip, Keszoox

JST ZH 1.5mm Connector: Complete Guide to Specs...

The definitive JST ZH 1.5mm connector guide — full specs and part numbers, all pin configurations 2–15, micro servo wiring, Raspberry Pi connections, PCB footprint for KiCad and Eagle, ZH...

JST ZH 1.5mm Connector: Complete Guide to Specs...

The definitive JST ZH 1.5mm connector guide — full specs and part numbers, all pin configurations 2–15, micro servo wiring, Raspberry Pi connections, PCB footprint for KiCad and Eagle, ZH...

Molex PicoBlade 1.25mm connector complete system — 51047 plug housings, through-hole vertical and right-angle PCB headers, 50058/50079 crimp terminals on carrier strip, and pre-crimped cable assemblies with green and red wires on grey background

Molex PicoBlade 1.25mm Connector: Complete Guid...

The definitive Molex PicoBlade 1.25mm connector guide — complete Molex part number system (51021/51047/51048/50079), all pin configurations 2–15, how to crimp PicoBlade terminals, how to release pins without damage, LiPo...

Molex PicoBlade 1.25mm Connector: Complete Guid...

The definitive Molex PicoBlade 1.25mm connector guide — complete Molex part number system (51021/51047/51048/50079), all pin configurations 2–15, how to crimp PicoBlade terminals, how to release pins without damage, LiPo...

DuPont 2.54mm connector components — black female housings in 1/2/4/6-pin, 2.54mm through-hole pin headers, female and male crimp terminals on strip, complete DuPont connector kit on blue background

DuPont Connector (2.54mm): Complete Guide to Cr...

The definitive DuPont connector guide — what 'DuPont' actually means, male vs female explained, crimping with and without tools, correct wire gauge, Arduino and breadboard wiring, motor connections, DuPont vs...

DuPont Connector (2.54mm): Complete Guide to Cr...

The definitive DuPont connector guide — what 'DuPont' actually means, male vs female explained, crimping with and without tools, correct wire gauge, Arduino and breadboard wiring, motor connections, DuPont vs...

JST GH 1.25mm connector components — BM-GHS SMD PCB headers, GHR plug housing with pre-crimped blue cable assembly and SSHL-002T crimp terminals on grey background — Pixhawk standard connector kit

JST GH 1.25mm Connector: Pixhawk Wiring Guide, ...

The definitive JST GH 1.25mm connector guide — Pixhawk GPS/TELEM/CAN pinouts, full specs, all pin configurations, crimp tool selection, how to attach wires to mini GH pins, and a detailed...

JST GH 1.25mm Connector: Pixhawk Wiring Guide, ...

The definitive JST GH 1.25mm connector guide — Pixhawk GPS/TELEM/CAN pinouts, full specs, all pin configurations, crimp tool selection, how to attach wires to mini GH pins, and a detailed...