NTP5860NL N-Channel Power MOSFET — 60V / 220A, TO-220, Logic-Level, 3.7mΩ Rds(on)

NTP5860NL N-Channel Power MOSFET — 60V / 220A, TO-220, Logic-Level

The NTP5860NL from ON Semiconductor is a high-performance logic-level N-channel power MOSFET combining a 60V drain-source rating, 220A pulsed current capability, and an ultra-low 3.7mΩ Rds(on) @ Vgs=10V in a standard TO-220 through-hole package. The “L” suffix confirms logic-level gate operation — fully enhanced at 4.5V Vgs for direct microcontroller drive. This combination of high voltage, high current, low Rds(on), and logic-level compatibility makes it one of the most capable TO-220 MOSFETs available for 24V and 48V power applications.

Key Specifications

Parameter	Value
Channel Type	N-Channel
Drain-Source Voltage (Vds)	60V
Continuous Drain Current (Id)	80A @ Tc=25°C
Pulsed Drain Current (Idm)	220A
On-Resistance (Rds(on))	3.7mΩ @ Vgs=10V
Gate Threshold Voltage (Vgs(th))	1.0V – 2.5V
Logic-Level Gate Drive	Fully on @ Vgs=4.5V
Total Power Dissipation	200W @ Tc=25°C
Gate Charge (Qg)	68nC typical
Package	TO-220 (through-hole)
Operating Temperature	-55°C to +175°C
Manufacturer	ON Semiconductor (onsemi)
RoHS Compliant	Yes

Why Choose the NTP5860NL?

• 60V Vds — handles 24V and 48V systems with safe transient headroom; suitable for automotive and industrial supply voltages
• 3.7mΩ Rds(on) — at 30A continuous, only 3.3W conduction loss; runs cool without heatsinking in moderate-current applications
• Logic-level gate (“L”) — fully enhanced at 4.5V; direct drive from 5V Arduino or 3.3V MCU GPIO at low switching frequencies
• 220A pulsed current — handles high inrush currents from motors and capacitive loads without damage
• TO-220 package — standard heatsink-compatible footprint, breadboard-friendly leads

NTP5860NL vs IRLB8721 vs STP40NF10L

MOSFET	Vds	Id (cont.)	Rds(on)	Logic Level	Best For
IRLB8721	30V	62A	8.7mΩ	✅	12V systems
STP40NF10L	100V	40A	28mΩ	✅	48V–100V systems
NTP5860NL	60V	80A	3.7mΩ	✅	24V–48V, high current

Typical Applications

• 24V / 48V DC motor speed control (PWM)
• High-current synchronous buck converter low-side switch
• Battery management system (BMS) 48V discharge switch
• E-bike and electric scooter motor controller
• High-current solenoid and actuator driver
• Automotive 24V accessory and load switching

Frequently Asked Questions

Q: Can I drive this from a 3.3V MCU directly?

At 3.3V Vgs, the NTP5860NL is partially enhanced but not fully on — Rds(on) will be significantly higher than the 3.7mΩ spec. For 3.3V MCU drive at currents above 5A or PWM above 10kHz, use a gate driver (TC4427, UCC27524) to provide a clean 10V gate drive signal.

Q: What gate resistor value should I use?

For low-frequency switching (<10kHz) from a 5V GPIO, use a 100–470Ω gate resistor to limit gate current spikes. For high-frequency PWM, reduce to 10–47Ω with a dedicated gate driver to minimize switching losses from the 68nC gate charge.

Package Contents

• 1× NTP5860NL N-Channel Power MOSFET (TO-220)

Enjoy free standard shipping on all orders over $199 USD. Orders are processed within 1–2 business days.

Not satisfied? Return any item within 90 days of purchase for a full refund or exchange. Items must be in original condition.

We are committed to quality, reliability, and customer satisfaction. Every product is carefully selected and tested to meet the highest standards.