W25N02KVZEIR 256MB (2G-bit) Serial NAND Flash — For Teensy 4.1 Memory Expansion
W25N02KVZEIR 256MB (2G-bit) Serial NAND Flash For Teensy 4.1 Memory Expansion
Compatible JST cables for sensors and modules — secure & reliable. Shop now.
Couldn't load pickup availability
W25N02KVZEIR 256MB (2G-bit) Serial NAND Flash — Teensy 4.1 Memory Expansion
The Winbond W25N02KVZEIR is a 256MB (2G-bit) SPI NAND Flash memory IC designed to expand the non-volatile storage on the Teensy 4.1 development board. The Teensy 4.1 PCB includes a dedicated footprint for one of these 8-pin flash chips, enabling large-capacity data storage for sensor logging, audio files, image files, and LittleFS file system applications — without any additional wiring.
Key Specifications
| Parameter | Value |
|---|---|
| Capacity | 256MB (2G-bit) |
| Technology | NAND Flash |
| Interface | SPI / Dual SPI / Quad SPI |
| Max Clock (SPI) | 104MHz |
| Max Clock (Quad SPI) | 104MHz (208MB/s effective) |
| Supply Voltage | 3.3V |
| Package | WSON-8 (8-pin, bottom-contact) |
| Manufacturer | Winbond |
Teensy 4.1 Installation Notes
- The Teensy 4.1 has a dedicated SOIC-8 footprint on the bottom of the board for this chip
- The W25N02KVZEIR uses a WSON package (leads tucked under the chip) — it can be soldered to the SOIC footprint with care
- Solder and test before installing header pins — access to the bottom pads is much easier before headers are soldered
- Use the LittleFS library for file system access on Teensy 4.1
Typical Applications
- Teensy 4.1 non-volatile data storage expansion
- Large sensor data logging (LittleFS file system)
- Audio file storage for Teensy Audio Library projects
- Image and bitmap file storage for display projects
- Configuration and firmware update storage
Frequently Asked Questions
Q: Can this be used to expand Teensy 4.1 program memory?
No — NAND Flash cannot be used to execute code directly. It is used for data storage only (files, logs, audio, images) via the LittleFS library. Program code must remain in the Teensy's internal flash.
Q: Is soldering difficult?
The WSON package has no exposed leads — all contacts are on the bottom of the chip. Use flux, a fine-tip iron, and solder wick. Soldering before installing header pins is strongly recommended for easier access and inspection.
Package Contents
- 1× Winbond W25N02KVZEIR NAND Flash IC (WSON-8)
Blog posts
View all-
IC Chips & Discrete Components Express Shipping...
Shipping IC chips and discrete electronic components internationally requires more than choosing a carrier. ESD-safe packaging, correct HS codes, accurate customs declarations, and carrier selection for your destination all determine...
IC Chips & Discrete Components Express Shipping...
Shipping IC chips and discrete electronic components internationally requires more than choosing a carrier. ESD-safe packaging, correct HS codes, accurate customs declarations, and carrier selection for your destination all determine...
-
From Prototype to Mass Production — How to Scal...
Scaling from prototype to mass production is the most critical transition in a hardware product's lifecycle. The sourcing strategy that works for 10 prototype boards — cut tape, spot pricing,...
From Prototype to Mass Production — How to Scal...
Scaling from prototype to mass production is the most critical transition in a hardware product's lifecycle. The sourcing strategy that works for 10 prototype boards — cut tape, spot pricing,...
-
ISO 9001 Electronic Component Distributor — Wha...
ISO 9001:2015 certification is the most widely recognized quality management standard in the world — but what does it actually mean when an electronic component distributor claims to be ISO...
ISO 9001 Electronic Component Distributor — Wha...
ISO 9001:2015 certification is the most widely recognized quality management standard in the world — but what does it actually mean when an electronic component distributor claims to be ISO...
