Keszoox
Automotive 8-Pin Waterproof Connector — MAF Sensor & Ignition Distributor Socket for Mitsubishi Lancer
Automotive 8-Pin Waterproof Connector MAF Sensor & Ignition Distributor Socket for Mitsubishi Lancer
Couldn't load pickup availability
Automotive 8-Pin Waterproof Connector — MAF Sensor & Ignition Distributor Socket for Mitsubishi Lancer
Mass airflow (MAF) sensor and ignition distributor connectors on Mitsubishi Lancer platforms operate in demanding under-hood environments — exposed to intake air turbulence, heat from the exhaust manifold, and the vibration of the 4G-series engine. A degraded connector at either position can cause rough idle, misfires, P0100–P0104 MAF sensor fault codes, and ignition timing errors that are difficult to diagnose without first ruling out the wiring harness. This 8-pin waterproof automotive connector is the OEM-specification solution for Mitsubishi Lancer MAF sensor and ignition distributor wiring harness repair.
Built from PA66 glass-filled nylon with a sealed waterproof housing and tin-plated copper alloy contacts, this connector delivers reliable sealed electrical continuity for MAF sensor signal, reference voltage, ground, and ignition distributor circuits. Whether you're diagnosing a MAF sensor fault or replacing a heat-damaged distributor connector, this connector provides OEM-grade fit and sealing performance.
Technical Specifications
| Parameter | Value |
|---|---|
| Pin Count | 8 pins |
| Connector Type | Waterproof automotive sensor / distributor connector |
| Primary Application | Mitsubishi Lancer MAF sensor, ignition distributor wiring harness |
| Sealing | Sealed / waterproof (wire seal + housing seal) |
| Housing Material | PA66 glass-filled nylon |
| Contact Material | Tin-plated copper alloy |
| Certification | CE |
| Origin | Mainland China |
Key Features
- ✅ Sealed waterproof design — wire seals and housing seal prevent water, oil mist, and contaminant ingress; essential for MAF sensor and distributor connector positions in the Mitsubishi Lancer engine bay
- ✅ 8-pin configuration — covers MAF sensor signal, reference voltage, ground, and ignition distributor circuits in a single connector body
- ✅ OEM-specification dimensional match — direct-fit replacement for Mitsubishi Lancer MAF sensor and ignition distributor wiring harness connector positions
- ✅ PA66 glass-filled nylon housing — rated for continuous under-hood temperatures; resistant to engine oil, coolant, and automotive cleaning solvents
- ✅ Tin-plated copper alloy contacts — low contact resistance for precise MAF sensor signal and ignition timing signal transmission; resists oxidation in sealed connector environments
- ✅ Positive locking latch — audible click confirms full engagement; prevents accidental disconnection from engine vibration and thermal cycling
- ✅ CE certified — meets European automotive electrical component standards
Common Applications
- Mitsubishi Lancer MAF (mass airflow) sensor wiring harness connector repair and replacement
- Mitsubishi Lancer ignition distributor wiring harness connector repair
- Mitsubishi 4G-series engine sensor and distributor harness repair
- Custom engine management wiring harness fabrication for Mitsubishi platforms
FAQ
Q: Will this connector fix a P0100–P0104 MAF sensor fault code?
A: If the fault is caused by a degraded or corroded MAF sensor connector, replacing the connector can restore proper sensor signal continuity and clear the fault. Always verify connector condition before replacing the MAF sensor itself.
Q: Are wire seals and terminals included?
A: Inclusion depends on the variant selected. Complete kits with OEM-specification crimp terminals and wire seals are available — check the product options before adding to cart.
Package Contents
- 1× 8-Pin Waterproof Automotive Connector for Mitsubishi Lancer MAF Sensor / Ignition Distributor (male plug or female socket as selected)
- Wire seals and crimp terminals included in complete kit variants
