Lithium Battery Protection Board BMS 3S-5S 12V 3.7V 100A LMO / LiPo / LiFePO4

$14.92 USD

Save Liquid error (snippets/price line 138): divided by 0% Sold out

Taxes included. Shipping calculated at checkout.

Color

Quantity

Lithium Battery Protection Board BMS — 3S–5S, 100A, LiPo / LMO / LiFePO4, 12V

A Battery Management System (BMS) protection board for 3S to 5S lithium battery packs (LiPo, LMO, and LiFePO4 cell chemistry), rated at 100A continuous discharge current. The BMS provides essential protection functions including overcharge protection, over-discharge protection, overcurrent protection, short circuit protection, and cell balancing to ensure safe and reliable operation of lithium battery packs in e-bikes, power tools, energy storage systems, and DIY battery projects.

Technical Specifications

Parameter	Value
Cell Configuration	3S / 4S / 5S (as selected)
Compatible Chemistry	LiPo (3.7V nominal), LMO, LiFePO4 (3.2V nominal)
Nominal Voltage (3S LiPo)	11.1V (12V nominal)
Continuous Discharge Current	100A
Peak Discharge Current	200A (brief)
Overcharge Protection	4.25V per cell (LiPo) / 3.65V per cell (LiFePO4)
Over-Discharge Protection	2.5V per cell (LiPo) / 2.0V per cell (LiFePO4)
Short Circuit Protection	Yes (automatic recovery)
Cell Balancing	Passive balancing (during charging)
Operating Temperature	−40°C to +60°C
Certification	CE, RoHS

Cell Configuration Reference

Config	LiPo Voltage	LiFePO4 Voltage	Application
3S	11.1V (12.6V full)	9.6V (10.95V full)	12V e-bike, power tool, UPS
4S	14.8V (16.8V full)	12.8V (14.6V full)	14.8V power tool, RC vehicle
5S	18.5V (21V full)	16V (18.25V full)	High-voltage power tool, e-scooter

Typical Applications

E-Bike Battery: 3S–5S 100A BMS for DIY e-bike lithium battery pack assembly and protection
Power Tool Battery: BMS for DIY power tool battery pack replacement and upgrade using 18650 or LiFePO4 cells
Energy Storage: BMS for DIY home energy storage system using LiFePO4 cells for solar power storage
RC Vehicle: High-current BMS for RC car, RC boat, and RC aircraft LiPo battery pack protection
UPS Battery: BMS for DIY UPS lithium battery pack replacing lead-acid batteries

FAQ

Q: Can I use this BMS for both charging and discharging?
A: Yes. This BMS supports both charge and discharge through the same B+ and B− terminals (common port BMS). Connect the charger and load to the same output terminals.

Q: Does this BMS support active balancing?
A: No. This BMS uses passive balancing (dissipates excess energy as heat in the highest-charged cell during charging). For large battery packs requiring fast balancing, use an active balancer in addition to this BMS.