Keszoox
JST SH 1.0mm 2-12Pin Reverse-Side-Head Cable 28AWG UL1571
JST SH 1.0mm 2-12Pin Reverse-Side-Head Cable 28AWG UL1571
Couldn't load pickup availability
JST SH 1.0mm Reverse-Side-Head Pre-Crimped Cable — 2–12 Pin, 28AWG UL1571
The JST SH 1.0mm reverse-side-head cable is the standard ultra-compact wiring harness for FPV drones, flight controllers, wearables, and miniature IoT devices. With a genuine JST SH housing on one end and bare tinned leads on the other, it connects directly to SH-series PCB headers while leaving the opposite end free for custom termination.
The reverse-side-head orientation means wires exit from the opposite side of the latch — the standard PCB-mount orientation that routes cables flat along the board surface, minimizing strain on the connector body.
Key Features
- JST SH 1.0mm pitch — genuine JST SH housing with SSH-003T-P0.2 contacts, positive-lock latch
- Reverse-side-head orientation — wires exit opposite side from latch, standard PCB-mount cable routing
- 2–12 pin options — covers all common SH-series pin counts
- 28AWG UL1571 PVC — ultra-fine, flexible wire rated −25°C to +85°C
- 1A / 50V rating — suitable for signal and low-current power lines
- Bare tinned leads — pre-tinned for direct PCB pad soldering or custom termination
- RoHS compliant
Typical Applications
- FPV drone flight controller, ESC, and GPS wiring
- Wearable electronics and fitness device connections
- Miniature IoT sensor and module PCB connections
- RC receiver and telemetry module wiring
- Compact robotics and automation wiring
Technical Specifications
- Connector Series: JST SH
- Pitch: 1.0 mm
- Contact: SSH-003T-P0.2
- Pin Count: 2–12 (select variant)
- Wire Gauge: 28 AWG
- Insulation: UL1571 PVC
- Voltage Rating: 50V
- Current Rating: 1A per contact
- Temperature Range: −25°C to +85°C
- Wire Exit: Reverse-side (opposite side from latch)
- RoHS Compliant: Yes
- Brand: Keszoox
- Origin: Mainland China
- ★Product Description
- ★About us
- ★Custom cable
JST SH 1.0mm Reverse-Side-Head Pre-Crimped Cable — 2–12 Pin, 28AWG UL1571
The JST SH 1.0mm reverse-side-head cable is the standard ultra-compact wiring harness for FPV drones, flight controllers, wearables, and miniature IoT devices. With a genuine JST SH housing on one end and bare tinned leads on the other, it connects directly to SH-series PCB headers while leaving the opposite end free for custom termination.
The reverse-side-head orientation means wires exit from the opposite side of the latch — the standard PCB-mount orientation that routes cables flat along the board surface, minimizing strain on the connector body.
Key Features
- JST SH 1.0mm pitch — genuine JST SH housing with SSH-003T-P0.2 contacts, positive-lock latch
- Reverse-side-head orientation — wires exit opposite side from latch, standard PCB-mount cable routing
- 2–12 pin options — covers all common SH-series pin counts
- 28AWG UL1571 PVC — ultra-fine, flexible wire rated −25°C to +85°C
- 1A / 50V rating — suitable for signal and low-current power lines
- Bare tinned leads — pre-tinned for direct PCB pad soldering or custom termination
- RoHS compliant
Typical Applications
- FPV drone flight controller, ESC, and GPS wiring
- Wearable electronics and fitness device connections
- Miniature IoT sensor and module PCB connections
- RC receiver and telemetry module wiring
- Compact robotics and automation wiring
Technical Specifications
- Connector Series: JST SH
- Pitch: 1.0 mm
- Contact: SSH-003T-P0.2
- Pin Count: 2–12 (select variant)
- Wire Gauge: 28 AWG
- Insulation: UL1571 PVC
- Voltage Rating: 50V
- Current Rating: 1A per contact
- Temperature Range: −25°C to +85°C
- Wire Exit: Reverse-side (opposite side from latch)
- RoHS Compliant: Yes
- Brand: Keszoox
- Origin: Mainland China
