Keszoox
JST GH 1.25mm 2-12Pin Reverse-Side-Head Cable 28AWG UL1571
JST GH 1.25mm 2-12Pin Reverse-Side-Head Cable 28AWG UL1571
Couldn't load pickup availability
JST GH 1.25mm Reverse-Side-Head Pre-Crimped Cable — 2–12 Pin, 28AWG UL1571
The JST GH 1.25mm reverse-side-head cable is the standard wiring harness for FPV drones, gimbals, GPS modules, and compact IoT devices. With a genuine JST GH housing on one end and bare tinned leads on the other, it connects directly to GH-series PCB headers while leaving the opposite end free for custom termination.
The reverse-side-head orientation means wires exit from the opposite side of the latch — the standard PCB-mount orientation that routes cables flat along the board surface, minimizing strain on the connector body.
Key Features
- JST GH 1.25mm pitch — genuine JST GH housing with SGH-001T-P0.2 contacts, positive-lock latch
- Reverse-side-head orientation — wires exit opposite side from latch, standard PCB-mount cable routing
- 2–12 pin options — covers all common GH-series pin counts for drones, gimbals, and IoT
- 28AWG UL1571 PVC — fine, flexible wire rated −25°C to +80°C, ideal for compact builds
- 1A / 50V rating — suitable for signal and low-current power lines
- Bare tinned leads — pre-tinned for direct soldering to PCB pads or custom connector termination
- RoHS compliant
Typical Applications
- FPV drone flight controller to ESC and GPS wiring
- Gimbal motor and camera signal connections
- GPS module and compass wiring (Pixhawk, ArduPilot)
- Wearable electronics and IoT sensor connections
- RC receiver and telemetry module wiring
- Compact robotics and automation wiring
Technical Specifications
- Connector Series: JST GH
- Pitch: 1.25 mm
- Contact: SGH-001T-P0.2
- Pin Count: 2–12 (select variant)
- Wire Gauge: 28 AWG
- Insulation: UL1571 PVC
- Voltage Rating: 50V
- Current Rating: 1A per contact
- Temperature Range: −25°C to +80°C
- Wire Exit: Reverse-side (opposite side from latch)
- RoHS Compliant: Yes
- Brand: Keszoox
- Origin: Mainland China
- ★Product Description
- ★About us
- ★Custom cable
JST GH 1.25mm Reverse-Side-Head Pre-Crimped Cable — 2–12 Pin, 28AWG UL1571
The JST GH 1.25mm reverse-side-head cable is the standard wiring harness for FPV drones, gimbals, GPS modules, and compact IoT devices. With a genuine JST GH housing on one end and bare tinned leads on the other, it connects directly to GH-series PCB headers while leaving the opposite end free for custom termination.
The reverse-side-head orientation means wires exit from the opposite side of the latch — the standard PCB-mount orientation that routes cables flat along the board surface, minimizing strain on the connector body.
Key Features
- JST GH 1.25mm pitch — genuine JST GH housing with SGH-001T-P0.2 contacts, positive-lock latch
- Reverse-side-head orientation — wires exit opposite side from latch, standard PCB-mount cable routing
- 2–12 pin options — covers all common GH-series pin counts for drones, gimbals, and IoT
- 28AWG UL1571 PVC — fine, flexible wire rated −25°C to +80°C, ideal for compact builds
- 1A / 50V rating — suitable for signal and low-current power lines
- Bare tinned leads — pre-tinned for direct soldering to PCB pads or custom connector termination
- RoHS compliant
Typical Applications
- FPV drone flight controller to ESC and GPS wiring
- Gimbal motor and camera signal connections
- GPS module and compass wiring (Pixhawk, ArduPilot)
- Wearable electronics and IoT sensor connections
- RC receiver and telemetry module wiring
- Compact robotics and automation wiring
Technical Specifications
- Connector Series: JST GH
- Pitch: 1.25 mm
- Contact: SGH-001T-P0.2
- Pin Count: 2–12 (select variant)
- Wire Gauge: 28 AWG
- Insulation: UL1571 PVC
- Voltage Rating: 50V
- Current Rating: 1A per contact
- Temperature Range: −25°C to +80°C
- Wire Exit: Reverse-side (opposite side from latch)
- RoHS Compliant: Yes
- Brand: Keszoox
- Origin: Mainland China
