Keszoox
JST PH 2.0mm 2-12Pin Reverse-Side-Head Cable 22AWG UL1007
JST PH 2.0mm 2-12Pin Reverse-Side-Head Cable 22AWG UL1007
Couldn't load pickup availability
JST PH 2.0mm Reverse-Side-Head Pre-Crimped Cable — 2–12 Pin, 22AWG UL1007
The JST PH 2.0mm reverse-side-head cable is the standard wiring harness for LiPo battery packs, FPV drones, LED lighting systems, and compact robotics. With a genuine JST PH housing on one end and bare tinned leads on the other, it connects directly to PH-series PCB headers while leaving the opposite end free for custom termination.
The reverse-side-head orientation means wires exit from the opposite side of the latch — the standard PCB-mount orientation that routes cables flat along the board surface.
Key Features
- JST PH 2.0mm pitch — genuine JST PH housing with SPH-002T-P0.5 contacts, positive-lock latch
- Reverse-side-head orientation — wires exit opposite side from latch, standard PCB-mount cable routing
- 2–12 pin options — covers all common PH-series pin counts
- 22AWG UL1007 PVC — rated −25°C to +80°C, 300V insulation
- 2A / 100V rating — suitable for signal and low-current power lines
- Bare tinned leads — pre-tinned for direct PCB pad soldering or custom termination
- RoHS compliant
Typical Applications
- LiPo battery pack wiring and balance connector harness
- FPV drone ESC and flight controller connections
- LED lighting driver and strip connections
- Compact robotics and servo wiring
- IoT sensor and module PCB connections
Technical Specifications
- Connector Series: JST PH
- Pitch: 2.0 mm
- Contact: SPH-002T-P0.5
- Pin Count: 2–12 (select variant)
- Wire Gauge: 22 AWG
- Insulation: UL1007 PVC, 300V
- Voltage Rating: 100V
- Current Rating: 2A per contact
- Temperature Range: −25°C to +80°C
- Wire Exit: Reverse-side (opposite side from latch)
- RoHS Compliant: Yes
- Brand: Keszoox
- Origin: Mainland China
- ★Product Description
- ★About us
- ★Custom cable
JST PH 2.0mm Reverse-Side-Head Pre-Crimped Cable — 2–12 Pin, 22AWG UL1007
The JST PH 2.0mm reverse-side-head cable is the standard wiring harness for LiPo battery packs, FPV drones, LED lighting systems, and compact robotics. With a genuine JST PH housing on one end and bare tinned leads on the other, it connects directly to PH-series PCB headers while leaving the opposite end free for custom termination.
The reverse-side-head orientation means wires exit from the opposite side of the latch — the standard PCB-mount orientation that routes cables flat along the board surface.
Key Features
- JST PH 2.0mm pitch — genuine JST PH housing with SPH-002T-P0.5 contacts, positive-lock latch
- Reverse-side-head orientation — wires exit opposite side from latch, standard PCB-mount cable routing
- 2–12 pin options — covers all common PH-series pin counts
- 22AWG UL1007 PVC — rated −25°C to +80°C, 300V insulation
- 2A / 100V rating — suitable for signal and low-current power lines
- Bare tinned leads — pre-tinned for direct PCB pad soldering or custom termination
- RoHS compliant
Typical Applications
- LiPo battery pack wiring and balance connector harness
- FPV drone ESC and flight controller connections
- LED lighting driver and strip connections
- Compact robotics and servo wiring
- IoT sensor and module PCB connections
Technical Specifications
- Connector Series: JST PH
- Pitch: 2.0 mm
- Contact: SPH-002T-P0.5
- Pin Count: 2–12 (select variant)
- Wire Gauge: 22 AWG
- Insulation: UL1007 PVC, 300V
- Voltage Rating: 100V
- Current Rating: 2A per contact
- Temperature Range: −25°C to +80°C
- Wire Exit: Reverse-side (opposite side from latch)
- RoHS Compliant: Yes
- Brand: Keszoox
- Origin: Mainland China
