Home Communications & Interfacing MAX485 TTL to RS-485 Interface Module — Half-Duplex, Modbus RTU, Arduino
Skip to product information
1 of 6

MAX485 TTL to RS-485 Interface Module — Half-Duplex, Modbus RTU, Arduino

MAX485 TTL to RS-485 Interface Module Half-Duplex, Modbus RTU, Arduino

Compatible JST cables for sensors and modules — secure & reliable. Shop now.

Regular price $9.72 USD
Sale price $9.72 USD
Save -198% Sold out
Taxes included. Shipping calculated at checkout.

MAX485 TTL to RS-485 Interface Module — Half-Duplex, Modbus RTU, Arduino

The MAX485 module converts between TTL serial (UART) and RS-485 differential signals, enabling Arduino and other microcontrollers to communicate over RS-485 industrial networks at distances up to 1200m. RS-485 differential signaling provides excellent noise immunity in industrial environments, and the multi-drop bus topology supports up to 32 devices on a single twisted-pair cable. Compatible with Modbus RTU, DMX512, and other RS-485 protocols.

Electrical Specifications

  • IC: Maxim MAX485
  • Mode: Half-duplex (transmit or receive, not simultaneously)
  • Data Rate: Up to 2.5Mbps
  • Range: Up to 1200m (at lower baud rates)
  • Bus Nodes: Up to 32 devices per bus segment
  • Supply Voltage: 3.3V – 5V
  • Control Pins: DE (Driver Enable) + RE (Receiver Enable)
  • Signaling: Differential (A/B lines) — excellent noise immunity

Arduino Wiring

  • VCC → 5V | GND → GND
  • DI (Data In) → Arduino TX pin
  • RO (Receiver Out) → Arduino RX pin
  • DE + RE → Arduino digital pin (tie together, HIGH=transmit, LOW=receive)
  • A/B → RS-485 bus twisted pair
  • Add 120Ω termination resistor at each end of the bus

RS-485 vs UART vs I²C

  • RS-485: 1200m range, 32 nodes, noise-immune differential — for industrial networks
  • UART: ~15m range, point-to-point — for short-distance serial communication
  • I²C: ~1m range, multi-device — for on-board sensor communication

Typical Applications

  • Arduino Modbus RTU master/slave — communicate with industrial sensors, meters, and PLCs
  • Building automation RS-485 bus — HVAC, lighting, and access control networks
  • Energy monitoring — smart meter and power analyzer communication
  • DMX512 lighting control — stage and architectural lighting
  • Multi-node sensor network — up to 32 Arduino nodes on one cable

MAX485 half-duplex RS-485 module — 1200m range, 32 nodes, Modbus RTU compatible for Arduino industrial networking and long-distance serial communication.

visa
View full details
Quality Guarantee Certified components
100% Safe Checkout SSL encrypted payment
Fast Shipping Worldwide delivery
90-Day Returns Hassle-free policy