Keszoox
Inline On/Off Push Button Switch for Table Lamp — White Cord Switch, 1/2/3pcs
Inline On/Off Push Button Switch for Table Lamp White Cord Switch, 1/2/3pcs
Couldn't load pickup availability
Inline On/Off Push Button Switch for Table Lamp — White Cord Switch
This white inline push button cord switch installs directly into a lamp power cord to add a convenient midway on/off control point — no rewiring of the lamp base or plug required. Simply cut the cord at the desired position, connect the two wire ends to the switch terminals, and snap the housing closed. Ideal for table lamps, bedside lights, floor lamps, and LED strip power cords where the original switch is broken, missing, or inconveniently located.
Key Specifications
| Parameter | Value |
|---|---|
| Switch Type | Inline push button (on/off toggle) |
| Housing Material | PC (polycarbonate) |
| Color | White |
| Installation | Midway cord installation (cut-and-connect) |
| Compatible Cord | Standard 2-core lamp cord (SPT-1, SPT-2) |
| Quantity Options | 1 / 2 / 3 pcs |
| Application | Table lamp, bedside lamp, floor lamp, LED strip |
| Origin | CN |
Why Use an Inline Cord Switch?
- No lamp disassembly needed — Install anywhere along the power cord without opening the lamp base or touching the socket wiring
- Convenient placement — Position the switch at arm’s reach from your bed, desk, or sofa for easy one-touch control
- Replaces broken switches — Restore function to lamps with failed rotary or pull-chain switches without buying a new lamp
- Clean white finish — Matches white lamp cords and blends with most home decor styles
- Multi-pack value — Order 2 or 3pcs to equip multiple lamps at once
Installation Steps
- Unplug the lamp from the wall socket
- Cut the lamp cord at the desired switch position (cut only one wire — the neutral or live, not both)
- Strip approximately 8mm of insulation from each cut end
- Connect the two wire ends to the switch terminals and tighten the screws
- Snap the switch housing closed
- Plug in and test
Frequently Asked Questions
Q: Which wire do I cut — live or neutral?
For safety, cut the live (hot) wire only. In a standard 2-core lamp cord, the live wire is typically the smooth-jacketed wire (the ribbed wire is neutral). If in doubt, consult a qualified electrician before installation.
Q: What is the maximum wattage this switch supports?
The switch is rated for standard lamp loads. Check the switch body for the rated current and voltage (typically 2A/250V or 6A/250V). Do not exceed the rated load — use a higher-rated switch for high-wattage halogen or incandescent lamps above 60W.
Package Contents
- 1 / 2 / 3 × White inline on/off push button cord switch (per selected quantity variant)
