Keszoox
Micro USB to DIP Adapter — 5-Pin Female, 2.54mm Pitch, PCB Breakout, -40°C to 85°C (5-Pack)
Micro USB to DIP Adapter 5-Pin Female, 2.54mm Pitch, PCB Breakout, -40°C to 85°C (5-Pack)
Couldn't load pickup availability
Micro USB to DIP Adapter — 5-Pin Female B-Type, 2.54mm Pitch, PCB Breakout (5-Pack)
This Micro USB to DIP adapter breaks out the 5 pins of a Micro USB Type-B female connector to standard 2.54mm (0.1") pitch through-hole pads, making it easy to add Micro USB power input or data connectivity to breadboard prototypes and custom PCBs. Rated from -40°C to +85°C, it is suitable for both prototyping and embedded product integration.
Key Specifications
| Parameter | Value |
|---|---|
| Connector Type | Micro USB Type-B Female (5-pin) |
| Pin Pitch | 2.54mm (0.1") — breadboard compatible |
| Pin Count | 5 (VBUS, D−, D+, ID, GND) |
| Operating Temperature | -40°C to +85°C |
| PCB Mounting | Through-hole, vertical |
| Quantity | 5 pieces |
Pin Mapping
| Pin | Signal | Description |
|---|---|---|
| 1 | VBUS | +5V power from USB host |
| 2 | D− | USB data negative |
| 3 | D+ | USB data positive |
| 4 | ID | OTG ID (leave floating for device mode) |
| 5 | GND | Ground |
Why Choose This Micro USB DIP Adapter?
- 2.54mm pitch — plugs directly into standard breadboards and perfboards without adapters
- -40°C to +85°C rating — suitable for industrial and outdoor embedded applications
- 5-pin breakout — exposes all USB signals including D+/D− for USB data projects
- Compact PCB module — easy to solder into custom PCB designs
- 5-pack value — enough for multiple projects and prototypes
Compatible With / Common Use Cases
- Arduino Nano / Pro Mini power input: Add Micro USB 5V power to breadboard-based Arduino projects
- ESP8266 / ESP32 breadboard power: 5V USB power supply for WiFi module prototyping
- USB charger circuit: Input connector for DIY Li-ion battery charger (with TP4056 module)
- USB data interface: D+/D− breakout for USB HID, CDC, or custom USB device projects (with CH340, CP2102, or STM32 USB)
- Custom PCB power input: Micro USB power connector for embedded product prototypes
Frequently Asked Questions
Q: Can I use this adapter for USB data transfer, not just power?
A: Yes. All 5 pins are broken out including D+ and D−, so you can connect them to a USB-to-serial IC (CH340G, CP2102, FT232RL) or a microcontroller with native USB (STM32, ATmega32U4) for full USB data communication.
Q: Is this compatible with standard 830-point breadboards?
A: Yes. The 2.54mm pin pitch fits directly into standard breadboard rows. The module body sits above the breadboard surface, leaving the pins accessible on both sides of the connector.
Q: What is the maximum current this adapter can handle?
A: The Micro USB connector is rated for up to 1.8A continuous current (USB 2.0 spec). For higher current (e.g., fast charging), use a USB Type-C connector instead. For typical 5V/500mA–1A Arduino and ESP32 projects, this adapter is fully adequate.
Package Contents
- 5× Micro USB to DIP Adapter (5-pin female, 2.54mm pitch)
