Keszoox
JST ZH 1.5mm 2-12Pin Same-Side-Head Cable 24AWG UL1007
JST ZH 1.5mm 2-12Pin Same-Side-Head Cable 24AWG UL1007
Couldn't load pickup availability
JST ZH 1.5mm Same-Side-Head Pre-Crimped Cable — 2–12 Pin, 24AWG UL1007
The JST ZH 1.5mm same-side-head cable is a specialized wiring harness for industrial electronics, LED lighting, and home appliances where cable routing must exit from the same side as the latch. This orientation is essential in tight enclosures where cables must route away from the PCB surface or toward the front of a housing.
With a genuine JST ZH housing on one end and bare tinned leads on the other, it connects directly to ZH-series PCB headers while leaving the opposite end free for custom termination.
Key Features
- JST ZH 1.5mm pitch — genuine JST ZH housing with SZH-002T-P0.5 contacts, positive-lock latch
- Same-side-head orientation — wires exit same side as latch, for specific cable routing in constrained enclosures
- 2–12 pin options — covers all common ZH-series pin counts
- 24AWG UL1007 PVC — rated −25°C to +85°C, 300V insulation
- 1A / 50V rating — suitable for signal and low-current power lines
- Bare tinned leads — pre-tinned for direct PCB pad soldering or custom termination
- RoHS compliant
Same-Side vs. Reverse-Side: Which Do I Need?
- Same-side head (this product): Wires exit on the same side as the latch — use when cables must route away from the PCB surface or toward the front of an enclosure
- Reverse-side head: Wires exit on the opposite side from the latch — the standard PCB-mount orientation, cables route flat along the board surface
Typical Applications
- Industrial control panel wiring in tight enclosures
- LED lighting driver connections with specific cable routing
- Home appliance internal wiring in constrained housings
- Small motor and actuator control wiring
- Compact power supply wiring
Technical Specifications
- Connector Series: JST ZH
- Pitch: 1.5 mm
- Contact: SZH-002T-P0.5
- Pin Count: 2–12 (select variant)
- Wire Gauge: 24 AWG
- Insulation: UL1007 PVC, 300V
- Voltage Rating: 50V
- Current Rating: 1A per contact
- Temperature Range: −25°C to +85°C
- Wire Exit: Same-side (same side as latch)
- RoHS Compliant: Yes
- Brand: Keszoox
- Origin: Mainland China

Blog posts
View all-
Best JST Connector Crimping Tools in 2026: Engi...
Choosing the wrong crimping tool ruins JST connectors and wastes wire. This guide compares the top crimping tools for JST SH, GH, PH, XH, and VH series — including Engineer...
Best JST Connector Crimping Tools in 2026: Engi...
Choosing the wrong crimping tool ruins JST connectors and wastes wire. This guide compares the top crimping tools for JST SH, GH, PH, XH, and VH series — including Engineer...
-
Molex KK 254 vs Mini-Fit Jr. vs Micro-Fit 3.0: ...
Choosing between Molex KK 254, Mini-Fit Jr., and Micro-Fit 3.0? This guide compares pitch, current rating, locking mechanism, wire gauge, and typical applications — with decision tables, part number references,...
Molex KK 254 vs Mini-Fit Jr. vs Micro-Fit 3.0: ...
Choosing between Molex KK 254, Mini-Fit Jr., and Micro-Fit 3.0? This guide compares pitch, current rating, locking mechanism, wire gauge, and typical applications — with decision tables, part number references,...
-
DuPont Connector vs JST PH 2.0: Pinout, Specs &...
Not sure whether to use a DuPont 2.54mm or JST PH 2.0mm connector? This guide compares pitch, locking mechanism, current rating, pinout, and best use cases — so you can...
DuPont Connector vs JST PH 2.0: Pinout, Specs &...
Not sure whether to use a DuPont 2.54mm or JST PH 2.0mm connector? This guide compares pitch, locking mechanism, current rating, pinout, and best use cases — so you can...