{"product_id":"6pin-toyota-accelerator-pedal-connector-90980-12303-6189-1083-dj7062y-0-6-11","title":"6-Pin Toyota Accelerator Pedal Connector 90980-12303 \/ 6189-1083 | DJ7062Y-0.6-11 | Waterproof Wiring Harness Plug","description":"\u003ch2\u003e6-Pin Toyota Accelerator Pedal Connector — OEM 90980-12303 \/ 6189-1083 | DJ7062Y-0.6-11 | Waterproof\u003c\/h2\u003e\n\n\u003cp\u003eThe correct replacement connector for the \u003cstrong\u003eToyota accelerator pedal position sensor (APPS) wiring harness\u003c\/strong\u003e, matching OEM part numbers \u003cstrong\u003e90980-12303\u003c\/strong\u003e and \u003cstrong\u003e6189-1083\u003c\/strong\u003e. The accelerator pedal position sensor is a critical engine management component — it communicates the driver’s throttle input to the ECU via a variable voltage signal. A damaged, corroded, or melted connector causes erratic throttle response, engine hesitation, throttle stuck open\/closed, and in some cases limp mode activation. This 6-pin waterproof connector (DJ7062Y-0.6-11) uses PA66 housing with rubber seals to protect the sensor connection from moisture, heat, and vibration in the pedal box environment. Available as a male connector set or pre-wired 15cm harness.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOEM Part Numbers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90980-12303 \/ 6189-1083\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDJ7062Y-0.6-11\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePin Count\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGender\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFemale (connector side, mates with sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePA66 (Nylon 66) plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSealing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRubber seal (individual wire seals + body seal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota accelerator pedal position sensor wiring harness\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMale Connector Set \/ 15cm Pre-Wired Harness\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMainland China\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatible Toyota Models\u003c\/h3\u003e\n\u003cp\u003eThis connector is used across a wide range of Toyota and Lexus vehicles equipped with the electronic throttle control (ETC) system. Cross-reference OEM part numbers 90980-12303 or 6189-1083 in your vehicle’s parts catalogue to confirm fitment for your specific model and year.\u003c\/p\u003e\n\n\u003ch3\u003eAccelerator Pedal Sensor Connector Failure Symptoms\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eErratic throttle response\u003c\/strong\u003e — intermittent signal loss causes the ECU to receive inconsistent throttle position data\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine hesitation or stumble\u003c\/strong\u003e — signal dropout during acceleration causes momentary power loss\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrottle stuck or unresponsive\u003c\/strong\u003e — complete connector failure causes the ECU to default to a fixed throttle position\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLimp mode activation\u003c\/strong\u003e — the ECU detects an out-of-range throttle signal and activates limp mode to protect the engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDTC codes\u003c\/strong\u003e — P0120, P0121, P0122, P0123, P0124 (throttle position sensor circuit faults)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eOEM 90980-12303 \/ 6189-1083 compatible\u003c\/strong\u003e — direct dimensional match for Toyota factory accelerator pedal sensor connector\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e6-pin configuration\u003c\/strong\u003e — covers all signal, power, and ground circuits in the accelerator pedal position sensor harness\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eRubber sealed\u003c\/strong\u003e — individual wire seals and body seal protect against moisture and contamination in the pedal box\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003ePA66 housing\u003c\/strong\u003e — flame-retardant nylon 66, resistant to automotive fluids and temperature cycling\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eCE certified\u003c\/strong\u003e — meets European automotive electrical component standards\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003ePre-wired harness option\u003c\/strong\u003e — 15cm colour-coded leads for fast splice repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRepair Procedure\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eLocate the accelerator pedal position sensor connector under the dashboard at the pedal assembly.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery negative terminal before starting electrical work.\u003c\/li\u003e\n  \u003cli\u003eUnplug the damaged connector from the sensor. Inspect the sensor terminals for damage.\u003c\/li\u003e\n  \u003cli\u003eCut the damaged connector from the harness, leaving maximum wire length.\u003c\/li\u003e\n  \u003cli\u003eFor the 15cm harness option: splice each lead to the corresponding vehicle wire using waterproof butt connectors or solder + heat shrink. Match wire colours carefully.\u003c\/li\u003e\n  \u003cli\u003eReconnect the battery and clear any stored DTC codes with an OBD-II scanner.\u003c\/li\u003e\n  \u003cli\u003eTest throttle response through the full pedal travel range before road testing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: My car is in limp mode — could this connector be the cause?\u003c\/strong\u003e\u003cbr\u003eA: Yes. A failed accelerator pedal sensor connector is a common cause of limp mode on Toyota vehicles. Check for DTC codes P0120–P0124 first. If the connector is visibly damaged, corroded, or has melted terminals, replace it before clearing codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to reprogram the ECU after replacing the connector?\u003c\/strong\u003e\u003cbr\u003eA: No. Replacing the connector does not require ECU reprogramming. Clear any stored DTC codes after the repair and perform a throttle position sensor reset procedure if required by your vehicle’s service manual.\u003c\/p\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOption as selected: Male Connector Set or 15cm Pre-Wired Harness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keszoox","offers":[{"title":"Male Connector Set","offer_id":47394053619947,"sku":"14:200004889#Male Connector Set","price":13.8,"currency_code":"USD","in_stock":true},{"title":"15 cm wire","offer_id":47394053652715,"sku":"14:200002130#15 cm wire","price":27.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/1005\/8731\/files\/6-pins-toyota-accelerator-plug-main.webp?v=1770176181","url":"https:\/\/keszoox.com\/products\/6pin-toyota-accelerator-pedal-connector-90980-12303-6189-1083-dj7062y-0-6-11","provider":"Keszoox","version":"1.0","type":"link"}