Keszoox
DJ3022-2.3-11/21 Automotive 2-Pin Wire Connector Cable Assembly with Terminals and Wires
DJ3022-2.3-11/21 Automotive 2-Pin Wire Connector Cable Assembly with Terminals and Wires
Couldn't load pickup availability
DJ3022-2.3-11/21 Automotive 2-Pin Wire Connector Cable Assembly
The DJ3022-2.3-11/21 is a CE-certified automotive 2-pin connector with a 2.3mm pitch, available as a complete cable assembly with pre-crimped terminals and wires. Designed for sensor and signal wiring in vehicle electrical systems, it offers a ready-to-install solution for harness repair and fabrication.
Key Specifications
| Parameter | Value |
|---|---|
| Model | DJ3022-2.3-11 (male) / DJ3022-2.3-21 (female) |
| Pin Count | 2 |
| Pitch | 2.3mm |
| Housing Material | PA66 (Nylon 66) |
| Terminal Material | Copper alloy, tin-plated |
| Seal | Rubber wire seals |
| Assembly Option | Loose terminals or pre-wired 15cm harness |
| Certification | CE |
Why Choose This Connector?
- ✅ CE certified for automotive-grade reliability
- ✅ Available as complete cable assembly — no crimping required
- ✅ 2.3mm pitch matches OEM DJ3022 series connector spec
- ✅ PA66 housing withstands automotive heat, oil, and vibration
- ✅ Matched male/female pair for complete harness repair
Typical Applications
- Automotive sensor wiring harness repair and fabrication
- Engine management system connector replacement
- Body control module (BCM) signal wiring
- Custom automotive wiring harness assembly
- General 2.3mm pitch 2-pin automotive connector cable assembly applications
Compatible With
Vehicles using DJ3022-2.3 OEM connector spec. Pre-wired option fits 20–24 AWG wire. Suitable for a wide range of automotive sensor and signal wiring applications.
FAQ
Q: What is the difference between DJ3022 and DJ7022 series?
A: The DJ3022 series uses a different housing geometry and locking mechanism compared to the DJ7022 series, despite sharing a similar 2.3mm pitch. Always verify the OEM model number before ordering.
Q: Does the cable assembly option come pre-crimped?
A: Yes. The 15cm wire harness option comes with terminals pre-crimped and inserted into the connector housing — ready to splice into your existing harness.
Q: What wire gauge is compatible?
A: Designed for 20–24 AWG wire, standard for automotive sensor signal circuits.
Package Contents
- Option A: 1× Connector housing + 2× crimp terminals + rubber seals
- Option B: 1× Pre-wired connector cable assembly with 15cm harness
- ★Product Description
- ★About us
- ★Custom cable
DJ3022-2.3-11/21 Automotive 2-Pin Wire Connector Cable Assembly
The DJ3022-2.3-11/21 is a CE-certified automotive 2-pin connector with a 2.3mm pitch, available as a complete cable assembly with pre-crimped terminals and wires. Designed for sensor and signal wiring in vehicle electrical systems, it offers a ready-to-install solution for harness repair and fabrication.
Key Specifications
| Parameter | Value |
|---|---|
| Model | DJ3022-2.3-11 (male) / DJ3022-2.3-21 (female) |
| Pin Count | 2 |
| Pitch | 2.3mm |
| Housing Material | PA66 (Nylon 66) |
| Terminal Material | Copper alloy, tin-plated |
| Seal | Rubber wire seals |
| Assembly Option | Loose terminals or pre-wired 15cm harness |
| Certification | CE |
Why Choose This Connector?
- ✅ CE certified for automotive-grade reliability
- ✅ Available as complete cable assembly — no crimping required
- ✅ 2.3mm pitch matches OEM DJ3022 series connector spec
- ✅ PA66 housing withstands automotive heat, oil, and vibration
- ✅ Matched male/female pair for complete harness repair
Typical Applications
- Automotive sensor wiring harness repair and fabrication
- Engine management system connector replacement
- Body control module (BCM) signal wiring
- Custom automotive wiring harness assembly
- General 2.3mm pitch 2-pin automotive connector cable assembly applications
Compatible With
Vehicles using DJ3022-2.3 OEM connector spec. Pre-wired option fits 20–24 AWG wire. Suitable for a wide range of automotive sensor and signal wiring applications.
FAQ
Q: What is the difference between DJ3022 and DJ7022 series?
A: The DJ3022 series uses a different housing geometry and locking mechanism compared to the DJ7022 series, despite sharing a similar 2.3mm pitch. Always verify the OEM model number before ordering.
Q: Does the cable assembly option come pre-crimped?
A: Yes. The 15cm wire harness option comes with terminals pre-crimped and inserted into the connector housing — ready to splice into your existing harness.
Q: What wire gauge is compatible?
A: Designed for 20–24 AWG wire, standard for automotive sensor signal circuits.
Package Contents
- Option A: 1× Connector housing + 2× crimp terminals + rubber seals
- Option B: 1× Pre-wired connector cable assembly with 15cm harness
- ♥Hear From Our Happy Customers
- ♥Verified Buyer Reviews
- ♥Trusted by Professionals and Engineers
