TL082CP Dual JFET Op-Amp IC DIP-8 – Low-Noise, Wide-Bandwidth
TL082CP Dual JFET Op-Amp IC DIP-8 – Low-Noise, Wide-Bandwidth
Compatible JST cables for sensors and modules — secure & reliable. Shop now.
Couldn't load pickup availability
TL082CP Dual JFET Op-Amp IC – DIP-8
The TL082CP is a dual JFET-input operational amplifier in a DIP-8 package – the lower-cost, slightly higher-noise sibling of the popular TL072. Both share the same JFET input architecture with very low input bias current (200pA typical), 3MHz gain-bandwidth product, and 13V/μs slew rate. The TL082 is an excellent general-purpose dual op-amp for audio circuits, active filters, and signal processing where two op-amp channels are needed and the tighter specifications of the TL072 are not required.
Electrical Specifications
- Part Number: TL082CP / TL082 / TL082ACP
- Package: DIP-8 (through-hole, 2.54mm pitch)
- Number of Op-Amps: 2 (dual)
- Input Type: JFET (low input bias current: ~200pA typical)
- Supply Voltage: ±2.25V to ±18V (dual supply)
- GBW: 3 MHz (typical)
- Slew Rate: 13 V/μs (typical)
- Input Offset Voltage: 3mV (typical), 15mV (max) – higher than TL072
- Input Noise Voltage: 18nV/√Hz (vs 18nV/√Hz for TL072 – similar)
- Operating Temperature: 0°C to +70°C
TL082 vs TL072 – Which to Choose?
- TL072: Tighter offset spec (3mV typical, 6mV max), lower noise – preferred for precision audio
- TL082: Higher offset spec (3mV typical, 15mV max) – lower cost, suitable for general-purpose use
- Both have identical GBW (3MHz) and slew rate (13V/μs) – same speed
- Use TL072 for audio preamplifiers and precision circuits; TL082 for general signal processing
Typical Applications
- Audio circuits: Preamplifiers, tone controls, and signal conditioning
- Active filters: Low-pass, high-pass, and bandpass filter stages
- Synthesizers: VCO, VCF, and envelope generator circuits
- Instrumentation: Dual-channel signal amplification and conditioning
- Guitar effects: Overdrive, distortion, and modulation circuits
Package Contents
- 1 × TL082CP DIP-8 dual JFET op-amp IC
Two JFET op-amps in one DIP-8 package – the TL082CP delivers 3MHz bandwidth and 13V/μs slew rate for audio and signal processing applications at a lower cost than the TL072.
- ★Product Description
- ★About us
- ★Custom cable
TL082CP Dual JFET Op-Amp IC – DIP-8
The TL082CP is a dual JFET-input operational amplifier in a DIP-8 package – the lower-cost, slightly higher-noise sibling of the popular TL072. Both share the same JFET input architecture with very low input bias current (200pA typical), 3MHz gain-bandwidth product, and 13V/μs slew rate. The TL082 is an excellent general-purpose dual op-amp for audio circuits, active filters, and signal processing where two op-amp channels are needed and the tighter specifications of the TL072 are not required.
Electrical Specifications
- Part Number: TL082CP / TL082 / TL082ACP
- Package: DIP-8 (through-hole, 2.54mm pitch)
- Number of Op-Amps: 2 (dual)
- Input Type: JFET (low input bias current: ~200pA typical)
- Supply Voltage: ±2.25V to ±18V (dual supply)
- GBW: 3 MHz (typical)
- Slew Rate: 13 V/μs (typical)
- Input Offset Voltage: 3mV (typical), 15mV (max) – higher than TL072
- Input Noise Voltage: 18nV/√Hz (vs 18nV/√Hz for TL072 – similar)
- Operating Temperature: 0°C to +70°C
TL082 vs TL072 – Which to Choose?
- TL072: Tighter offset spec (3mV typical, 6mV max), lower noise – preferred for precision audio
- TL082: Higher offset spec (3mV typical, 15mV max) – lower cost, suitable for general-purpose use
- Both have identical GBW (3MHz) and slew rate (13V/μs) – same speed
- Use TL072 for audio preamplifiers and precision circuits; TL082 for general signal processing
Typical Applications
- Audio circuits: Preamplifiers, tone controls, and signal conditioning
- Active filters: Low-pass, high-pass, and bandpass filter stages
- Synthesizers: VCO, VCF, and envelope generator circuits
- Instrumentation: Dual-channel signal amplification and conditioning
- Guitar effects: Overdrive, distortion, and modulation circuits
Package Contents
- 1 × TL082CP DIP-8 dual JFET op-amp IC
Two JFET op-amps in one DIP-8 package – the TL082CP delivers 3MHz bandwidth and 13V/μs slew rate for audio and signal processing applications at a lower cost than the TL072.
