DuPont 2.0mm 2–12Pin Reverse-Side-Head Cable 24AWG UL1007 PVC

DuPont 2.0mm Reverse-Side-Head Cable — 2–12 Pin, 24AWG UL1007 PVC

The Keszoox DuPont 2.0mm reverse-side-head cable is a pre-crimped wire harness where conductors exit from the opposite side of the latch of the female housing. This is the standard PCB wiring orientation: cables route flat along the PCB surface or toward the rear of an enclosure without bending stress on the connector body or the crimp terminals.

Available in 2 to 12-pin configurations, built to UL1007 PVC standards with 24AWG stranded copper, rated at 2A / 250V AC/DC, RoHS compliant.

What Is a Reverse-Side-Head DuPont Cable?

In a reverse-side-head (also called reverse-head or opposite-side-exit) DuPont cable, the wire bundle exits from the face of the housing that is opposite to the latch tab. When the connector is mated to a vertical PCB pin header, the wires run parallel to the PCB surface and away from the board — the most common and mechanically preferred routing for PCB-mounted connectors. This orientation minimizes strain on the crimp joint and allows cables to be dressed flat against the PCB or chassis.

Reverse-Side vs. Same-Side: Which Do I Need?

• Reverse-side-head (this product): Wires exit opposite the latch — cables route flat along the PCB surface or toward the rear of an enclosure. Use for standard PCB-mounted connector wiring where cables must lie flat.
• Same-side-head: Wires exit same side as the latch — cables route away from the PCB surface or toward the front of an enclosure. Use in tight enclosures where the cable must exit in a specific direction.

Key Features

• Reverse-side wire exit — standard PCB orientation, conductors exit opposite the housing latch for flat cable routing
• 2.0mm pitch female housing — compatible with all standard 2.0mm through-hole pin headers
• 2 to 12-pin options — covers all common multi-wire PCB wiring configurations
• 24AWG stranded copper — flexible, low-resistance, suitable for signal and low-current power lines up to 2A
• UL1007 PVC insulation — rated −25°C to +85°C, flame-retardant, RoHS compliant
• 2A / 250V rating — suitable for signal and low-current power applications
• Color-coded conductors — each wire is a distinct color for easy identification during assembly and troubleshooting
• Factory-crimped terminals — consistent crimp quality, verified pull-force retention

Common Applications

• PCB-to-module signal wiring in embedded systems and microcontroller boards
• RC receiver, ESC, and flight controller connections (2.0mm pitch is standard in many RC systems)
• Sensor module, display panel, and BMS internal wiring
• Consumer electronics internal harness assembly
• Arduino and development board prototyping with 2.0mm headers
• Custom low-volume production harness assembly

Technical Specifications

• Connector Type: Reverse-side-head female housing (wire exit opposite latch)
• Pitch: 2.00mm (0.079 inch)
• Pin Count: 2–12 positions (select variant)
• Wire Gauge: 24 AWG stranded copper
• Insulation: UL1007 PVC
• Voltage Rating: 250V AC/DC
• Current Rating: 2A per conductor (continuous)
• Temperature Range: −25°C to +85°C
• Housing Material: Nylon PA66, UL94 V-0
• RoHS Compliant: Yes — EU Directive 2011/65/EU
• Brand: Keszoox | Origin: Mainland China

Enjoy free standard shipping on all orders over $199 USD. Orders are processed within 1–2 business days.

Not satisfied? Return any item within 90 days of purchase for a full refund or exchange. Items must be in original condition.

We are committed to quality, reliability, and customer satisfaction. Every product is carefully selected and tested to meet the highest standards.