Keszoox
Molex 51005 Female Single-Head Pre-Crimped Cable — MX 2.0mm, 2–12 Pin, 22AWG UL1007
Molex 51005 Female Single-Head Pre-Crimped Cable MX 2.0mm, 2–12 Pin, 22AWG UL1007
Couldn't load pickup availability
Molex 51005 Female Single-Head Pre-Crimped Cable — MX 2.0mm, 2–12 Pin, 22AWG
A Molex 51005-compatible female receptacle housing on one end, bare tinned leads on the other — the fastest way to wire a Molex 51005 / 51006 (Micro Losi / MX 2.0mm) connector into your project without crimping. Simply plug the female housing onto your 51006 PCB header and solder or terminate the bare leads as needed.
Available in 2P through 12P to cover every common Molex 51005 pin count. Color-coded conductors make polarity identification instant — critical for RC/LiPo battery applications where Pin 1 (red) = positive and Pin 2 (black) = negative.
Key Specifications
- Connector: Molex MX 2.0mm female receptacle (51005-compatible), friction/positive latch
- Pitch: 2.00 mm | Pin counts: 2 to 12 pin
- Wire: 22AWG UL1007 PVC, color-coded conductors
- Voltage rating: 300 V | Current rating: 3A per contact
- Temperature range: −25°C to +80°C
- Termination: Female housing one end, bare tinned leads other end
- Compliance: RoHS
Pinout Convention (2-Pin RC/Battery)
- Pin 1 — Red wire — Positive (+)
- Pin 2 — Black wire — Negative / Ground (−)
Always verify pin 1 orientation against your PCB silkscreen before connecting to a LiPo battery. Reverse polarity will damage ESCs and receivers.
Typical Applications
- 🔋 RC / FPV: 1S/2S LiPo battery pigtail replacement for micro RC cars and Blade Inductrix-style FPV quads (Micro Losi standard)
- 📡 IoT & Embedded: Sensor and battery wiring for MCU boards, wireless nodes, and compact embedded systems
- 🔧 Prototyping: Rapid harness assembly — plug into 51006 header, solder bare leads to PCB pad or screw terminal
- 🩺 Wearables & Medical: Low-current sensor connections in portable and wearable devices
- 🏭 Industrial: Signal-level wire-to-board connections in compact control modules
Compatibility Note
This cable mates with Molex 51006 PCB headers (2.0mm pitch, through-hole). It is not compatible with JST PH 2.0mm headers despite identical pitch — housing geometry differs. For JST PH applications, see our JST PH 2.0mm cable range.
- ★Product Description
- ★About us
- ★Custom cable
Molex 51005 Female Single-Head Pre-Crimped Cable — MX 2.0mm, 2–12 Pin, 22AWG
A Molex 51005-compatible female receptacle housing on one end, bare tinned leads on the other — the fastest way to wire a Molex 51005 / 51006 (Micro Losi / MX 2.0mm) connector into your project without crimping. Simply plug the female housing onto your 51006 PCB header and solder or terminate the bare leads as needed.
Available in 2P through 12P to cover every common Molex 51005 pin count. Color-coded conductors make polarity identification instant — critical for RC/LiPo battery applications where Pin 1 (red) = positive and Pin 2 (black) = negative.
Key Specifications
- Connector: Molex MX 2.0mm female receptacle (51005-compatible), friction/positive latch
- Pitch: 2.00 mm | Pin counts: 2 to 12 pin
- Wire: 22AWG UL1007 PVC, color-coded conductors
- Voltage rating: 300 V | Current rating: 3A per contact
- Temperature range: −25°C to +80°C
- Termination: Female housing one end, bare tinned leads other end
- Compliance: RoHS
Pinout Convention (2-Pin RC/Battery)
- Pin 1 — Red wire — Positive (+)
- Pin 2 — Black wire — Negative / Ground (−)
Always verify pin 1 orientation against your PCB silkscreen before connecting to a LiPo battery. Reverse polarity will damage ESCs and receivers.
Typical Applications
- 🔋 RC / FPV: 1S/2S LiPo battery pigtail replacement for micro RC cars and Blade Inductrix-style FPV quads (Micro Losi standard)
- 📡 IoT & Embedded: Sensor and battery wiring for MCU boards, wireless nodes, and compact embedded systems
- 🔧 Prototyping: Rapid harness assembly — plug into 51006 header, solder bare leads to PCB pad or screw terminal
- 🩺 Wearables & Medical: Low-current sensor connections in portable and wearable devices
- 🏭 Industrial: Signal-level wire-to-board connections in compact control modules
Compatibility Note
This cable mates with Molex 51006 PCB headers (2.0mm pitch, through-hole). It is not compatible with JST PH 2.0mm headers despite identical pitch — housing geometry differs. For JST PH applications, see our JST PH 2.0mm cable range.
