Keszoox
2-Pin 6.3mm Female Connector 63080 Automotive Wire Harness High-Current Plug Socket
2-Pin 6.3mm Female Connector 63080 Automotive Wire Harness High-Current Plug Socket
Couldn't load pickup availability
2-Pin 6.3mm Female Connector — 63080 | Automotive High-Current Wire Harness
Heavy-duty 2-pin 6.3mm pitch female connector for automotive high-current wiring harnesses. The 6.3mm terminal pitch supports up to 25A per pin, making this connector ideal for motor power feeds, relay outputs, solenoid circuits, and other high-current 2-wire automotive applications where standard sensor connectors are insufficient.
Specifications
| Parameter | Value |
|---|---|
| Pin Count | 2 |
| Pitch | 6.3 mm (high-current) |
| Part Number | 63080 |
| Housing Material | PA66 (Nylon 66) |
| Sealing | Non-sealed (protected routing) |
| Current Rating | Up to 25A per pin |
| Wire Gauge | 0.5–6.0mm² (AWG 20–10) |
| Operating Temperature | -40°C to +105°C |
| Application | Motor power feed, relay output, solenoid, high-current 2-wire circuit |
| Certification | CE |
Compatible Applications
- Relay output wiring — horn relay, fuel pump relay, fan relay 2-wire power feeds
- Motor power connectors — window motor, wiper motor, actuator 2-wire feeds
- Solenoid wiring — transmission solenoid, HVAC actuator high-current circuits
- Fuse box sub-harness — high-current 2-wire distribution connections
- Aftermarket accessory wiring — winch, compressor, light bar 2-pin power connectors
Why Choose This Connector?
- ✅ 6.3mm pitch — supports up to 25A per pin for high-current 2-wire circuits
- ✅ Accepts up to 6.0mm² wire — suitable for motor and relay power feeds
- ✅ PA66 housing — heat-resistant for underhood high-current applications
- ✅ Compact 2-pin design — minimal footprint for tight mounting locations
- ✅ CE certified — meets EU automotive electrical standards
Comparison: 2-Pin High-Current Connector Pitches
| Pitch | Max Current/Pin | Wire Gauge | Typical Use |
|---|---|---|---|
| 3.5mm | ~10A | 0.5–1.5mm² | Actuators, sensors |
| 6.3mm (this) | ~25A | 0.5–6.0mm² | Motors, relays, solenoids |
| 7.8mm | ~30A | 1.0–6.0mm² | High-current power distribution |
Application Scenarios
- Horn relay output 2-pin connector in custom engine bay wiring
- Fuel pump relay power feed connector in aftermarket EFI system
- Window motor 2-pin power connector replacement during door panel repair
- Winch or compressor 2-pin power connector on off-road vehicle custom wiring
FAQ
Q: What is the maximum current rating for this connector?
A: The 6.3mm terminal series supports up to approximately 25A per pin, making it suitable for motor power feeds, relay outputs, and solenoid circuits.
Q: Is this connector waterproof?
A: No. The 63080 is a non-sealed connector designed for protected routing (engine bay brackets, fuse box areas). For exposed underbody or exterior use, a sealed high-current connector is recommended.
Q: Are terminals included?
A: No. This listing is for the connector housing only. 6.3mm female crimp terminals are sold separately.
Package Contents
- 1× 2-Pin 6.3mm Female Connector Housing (63080)
- Terminals not included
