Keszoox
3-Pin 1.2mm Waterproof Camshaft Speed Sensor Connector 7283-8730-30 MG641234-5 DJ7035A-1.2 Mitsubishi Nissan EVO
3-Pin 1.2mm Waterproof Camshaft Speed Sensor Connector 7283-8730-30 MG641234-5 DJ7035A-1.2 Mitsubishi Nissan EVO
Couldn't load pickup availability
3-Pin 1.2mm Waterproof Camshaft & Speed Sensor Connector — 7283-8730-30 / MG641234-5 / DJ7035A-1.2
OEM-compatible Yazaki-spec 3-pin 1.2mm waterproof connector for Mitsubishi and Nissan camshaft position sensor (CMP) and vehicle speed sensor (VSS) wiring harnesses. Covers Mitsubishi MIVEC variable valve timing sensors and Lancer Evolution (EVO IV–X) engine management circuits — a critical connector for performance engine harness repair and restoration.
Specifications
| Parameter | Value |
|---|---|
| Pin Count | 3 |
| Pitch | 1.2 mm |
| OEM Part Numbers | 7283-8730-30 / MG641234-5 / DJ7035A-1.2 |
| Connector Family | Yazaki 1.2mm series |
| Housing Material | PA66 (Nylon 66) |
| Sealing | Rubber wire seal (waterproof) |
| Waterproof Rating | IP67 |
| Operating Temperature | -40°C to +125°C |
| Application | Camshaft position sensor, vehicle speed sensor, MIVEC sensor |
| Certification | CE |
Compatible Vehicles & Engines
- Mitsubishi Lancer Evolution IV–X (4G63T / 4B11T) — camshaft position sensor connector
- Mitsubishi Eclipse / Galant (4G63 / 4G64) — MIVEC camshaft sensor harness
- Mitsubishi Outlander / ASX (4B11 / 4J11) — speed and cam sensor wiring
- Nissan Silvia / 180SX / 200SX (SR20DET) — camshaft sensor connector
- Nissan Skyline GT-R (RB26DETT) — cam/crank sensor harness repair
- General Mitsubishi / Nissan vehicles using Yazaki 7283-8730-30 series connectors
Why Choose This Connector?
- ✅ 3 OEM cross-references: 7283-8730-30 / MG641234-5 / DJ7035A-1.2 — confirmed Mitsubishi & Nissan fitment
- ✅ Yazaki 1.2mm spec — OEM-accurate mating geometry for JDM vehicles
- ✅ IP67 rubber wire seal — protects against oil mist in high-performance engine bays
- ✅ 1.2mm ultra-compact pitch — fits tight sensor locations on MIVEC and turbo engines
- ✅ CE certified — meets EU automotive electrical standards
Application Scenarios
- MIVEC camshaft sensor connector replacement on Mitsubishi EVO IX / X (4G63T / 4B11T)
- Cam sensor harness repair on Nissan SR20DET during engine rebuild or swap
- Speed sensor connector restoration on Mitsubishi Outlander 4B11 after harness chafing
- Custom engine management harness build for EVO or SR20 swap into non-Mitsubishi/Nissan chassis
Comparison: Mitsubishi Cam/Speed Sensor Connectors
| Part Number | Pitch | Application | Engine |
|---|---|---|---|
| 7283-8730-30 / DJ7035A-1.2 | 1.2mm | CMP / VSS sensor | 4G63T / 4B11T / SR20DET |
| PU465-03127 / DJ70393-2.2 | 2.2mm | Ignition coil (COP) | 4G63 / 4G64 / 6G72 |
| FW-C-D3F-B / DJ7038FA-2.3 | 2.3mm | Ignition coil (COP) | Subaru EJ20 / FA20 |
FAQ
Q: Is this connector compatible with Mitsubishi EVO 4G63T and 4B11T engines?
A: Yes. The 7283-8730-30 / MG641234-5 connector is used on both the 4G63T (EVO IV–IX) and 4B11T (EVO X) camshaft position sensor circuits. It is also used for MIVEC variable valve timing sensors on these engines.
Q: What is the difference between 7283-8730-30 and MG641234-5?
A: 7283-8730-30 is the Yazaki connector manufacturer part number. MG641234-5 is the Mitsubishi OEM part number for the same connector. They are identical housings — use either reference to confirm fitment.
Q: What terminals are compatible?
A: Yazaki 1.2mm series female terminals for 0.13–0.35mm² (AWG 26–22) wire. Terminals are sold separately.
Package Contents
- 1× 3-Pin 1.2mm Waterproof Connector Housing (7283-8730-30 / MG641234-5 / DJ7035A-1.2)
- Terminals not included
