Keszoox
3-Pin 2.2mm Waterproof VSS Sensor Connector 90980-11145 DS-BN-3F-GR DJ70380-2.2-21 for Toyota Corolla
3-Pin 2.2mm Waterproof VSS Sensor Connector 90980-11145 DS-BN-3F-GR DJ70380-2.2-21 for Toyota Corolla
Couldn't load pickup availability
3-Pin 2.2mm Waterproof VSS Sensor Connector — 90980-11145 / DS-BN-3F-GR / DJ70380-2.2-21 for Toyota Corolla
OEM-compatible Yazaki-spec 3-pin 2.2mm waterproof vehicle speed sensor (VSS) connector for Toyota Corolla and related platforms. Cross-references Toyota OEM part 90980-11145 and Yazaki part DS-BN-3F-GR — a critical connector for transmission output speed sensor and ABS wheel speed sensor harness repair on Toyota vehicles.
Specifications
| Parameter | Value |
|---|---|
| Pin Count | 3 |
| Pitch | 2.2 mm |
| OEM Part Numbers | 90980-11145 / DS-BN-3F-GR / 11143 / DJ70380-2.2-21 |
| Connector Family | Yazaki 2.2mm series |
| Housing Material | PA66 (Nylon 66) |
| Sealing | Rubber wire seal (waterproof) |
| Waterproof Rating | IP67 |
| Operating Temperature | -40°C to +125°C |
| Application | VSS (vehicle speed sensor), ABS wheel speed sensor |
| Certification | CE |
Compatible Vehicles & Applications
- Toyota Corolla E110 / E120 / E140 / E150 — VSS and ABS sensor connector
- Toyota Camry XV20 / XV30 / XV40 — vehicle speed sensor harness
- Toyota RAV4 XA10 / XA20 / XA30 — speed sensor wiring repair
- Toyota Yaris / Vios / Altis — VSS connector replacement
- Suzuki Alto / Swift (shared Yazaki connector family) — speed sensor harness
- General Toyota vehicles using Yazaki 90980-11145 / DS-BN-3F-GR series
Why Choose This Connector?
- ✅ 4 OEM cross-references: 90980-11145 / DS-BN-3F-GR / 11143 / DJ70380-2.2-21
- ✅ Yazaki OEM-spec geometry — direct plug-in replacement for Toyota factory harness
- ✅ IP67 rubber wire seal — protects against road spray and moisture at wheel speed sensor locations
- ✅ PA66 housing — heat and chemical resistant for underbody sensor environments
- ✅ CE certified — meets EU automotive electrical standards
Comparison: Toyota VSS Connector Variants
| Part Number | Pitch | Application | Platform |
|---|---|---|---|
| 90980-11145 / DJ70380-2.2-21 | 2.2mm | VSS / ABS sensor | Toyota Corolla / Camry |
| 6189-0099 / DJ7035C-2.2 | 2.2mm | VSS / MAP sensor | Toyota 1JZ / 2JZ |
| 6189-0596 | 2.2mm | VSS sensor | Honda K-Series |
Application Scenarios
- VSS connector replacement on Toyota Corolla E120 / E140 during gearbox service
- ABS wheel speed sensor harness repair on Toyota Camry XV40
- Speed sensor connector restoration on Toyota RAV4 XA30 after underbody damage
- Custom harness build for Toyota engine swap requiring sealed VSS connector
FAQ
Q: Is 90980-11145 the same as DS-BN-3F-GR?
A: Yes. 90980-11145 is the Toyota OEM part number, while DS-BN-3F-GR is the Yazaki manufacturer part number for the same connector housing. They are identical and interchangeable.
Q: Is this connector compatible with Suzuki Alto?
A: Yes. Suzuki vehicles using Yazaki 2.2mm connectors share the same housing geometry. Verify the OEM part number on your specific Suzuki model before ordering.
Q: What terminals are compatible?
A: Yazaki 2.2mm series female terminals for 0.3–0.85mm² (AWG 22–18) wire. Terminals are sold separately.
Package Contents
- 1× 3-Pin 2.2mm Waterproof Connector Housing (90980-11145 / DS-BN-3F-GR / DJ70380-2.2-21)
- Terminals not included
