Keszoox
3-Pin GM MAP Sensor Waterproof Connector 12162182 12162185 Male Female with 15cm Wire
3-Pin GM MAP Sensor Waterproof Connector 12162182 12162185 Male Female with 15cm Wire
Couldn't load pickup availability
3-Pin GM MAP Sensor Waterproof Connector — 12162182 / 12162185 with 15cm Wire Pigtail
OEM-compatible 3-pin waterproof connector pre-wired with 15cm pigtail leads for GM manifold absolute pressure (MAP) sensor wiring harnesses. Cross-references GM/Delphi part numbers 12162182 (female) and 12162185 (male) — used across LS-series, Vortec, and Ecotec engines for MAP sensor circuit repair. The pre-wired pigtail eliminates terminal crimping, enabling fast splice-in harness repair.
Specifications
| Parameter | Value |
|---|---|
| Pin Count | 3 |
| OEM Part Numbers | 12162182 (female) / 12162185 (male) |
| Housing Material | PA66 (Nylon 66) |
| Sealing | Rubber wire seal (waterproof) |
| Waterproof Rating | IP67 |
| Wire Length | 15 cm pre-wired pigtail |
| Wire Gauge | 0.35mm² (AWG 22) |
| Gender | Male (12162185) + Female (12162182) |
| Operating Temperature | -40°C to +125°C |
| Application | MAP sensor (manifold absolute pressure) |
| Certification | CE |
Compatible Vehicles & Engines
- GM LS-series engines (LS1 / LS2 / LS3 / LS7) — MAP sensor harness pigtail
- Chevrolet Silverado / GMC Sierra Vortec 4.8 / 5.3 / 6.0 — MAP sensor connector
- Chevrolet Camaro / Corvette (LS1 / LS2 / LS3) — MAP sensor wiring repair
- Buick / Pontiac / Cadillac GM-platform — MAP sensor sub-harness
- GM Ecotec 2.0 / 2.4 engines — MAP sensor pigtail replacement
- Aftermarket EFI systems (Holley, MegaSquirt, AEM) using GM MAP sensors
Why Choose This Connector?
- ✅ Pre-wired 15cm pigtail — no terminal crimping required, splice directly into harness
- ✅ GM OEM cross-reference 12162182 / 12162185 — confirmed LS and Vortec MAP sensor fitment
- ✅ Male + female pair — complete connector set for both harness sides
- ✅ IP67 rubber wire seal — protects against oil mist and moisture in engine bay
- ✅ CE certified — meets EU automotive electrical standards
Application Scenarios
- MAP sensor pigtail replacement on LS1 / LS2 Camaro / Corvette during engine rebuild
- MAP sensor connector repair on Chevrolet Silverado Vortec 5.3 after harness chafing
- Custom LS-swap harness build requiring pre-wired MAP sensor pigtail
- Aftermarket EFI MAP sensor wiring using GM-spec connector for clean ECU integration
Comparison: GM MAP Sensor Connector vs Similar Pigtails
| Part Number | Application | Wire Length | Sealing |
|---|---|---|---|
| 12162182 / 12162185 | GM MAP sensor | 15cm pigtail | IP67 |
| 12110192 / DJ7034YA-1.5 | GM oil/fuel pressure sensor | Housing only | IP67 |
| DJ7032W-0.6-21 | CMP sensor / injector | 15cm pigtail | IP67 |
FAQ
Q: What is the difference between 12162182 and 12162185?
A: 12162182 is the female connector (socket side, connects to the MAP sensor body). 12162185 is the male connector (plug side, connects to the wiring harness). Both come pre-wired with 15cm leads.
Q: Do I need a crimping tool to install this connector?
A: No. The pigtail leads are pre-crimped and sealed. Simply strip the wire ends and splice into your existing harness using butt connectors or solder + heat shrink.
Q: Is this compatible with aftermarket MAP sensors used with MegaSquirt or Holley EFI?
A: Yes, as long as the aftermarket MAP sensor uses the GM 3-pin connector format (12162182 / 12162185). Many popular aftermarket MAP sensors (GM 1-bar, 2-bar, 3-bar) use this exact connector.
Package Contents
- 1× Female Connector (12162182) with 15cm pre-wired pigtail
- 1× Male Connector (12162185) with 15cm pre-wired pigtail
