Keszoox
3-Pin Sealed ABS Sensor Waterproof Connector — OEM 7283-8852-30 / 7282-8852-30 Male Female
3-Pin Sealed ABS Sensor Waterproof Connector OEM 7283-8852-30 / 7282-8852-30 Male Female
Couldn't load pickup availability
3-Pin Sealed ABS Sensor Waterproof Connector — OEM 7283-8852-30 / 7282-8852-30
This 3-pin sealed waterproof connector is the OEM-specification replacement for ABS wheel speed sensor connectors, compatible with part numbers 7283-8852-30 (female/socket) and 7282-8852-30 (male/plug). The sealed design with rubber wire seals provides reliable waterproof protection for ABS sensor connections exposed to road splash, mud, and moisture in underbody locations.
Key Specifications
| Parameter | Value |
|---|---|
| OEM Part Numbers | 7283-8852-30 (female) / 7282-8852-30 (male) |
| Pin Count | 3-pin |
| Gender | Male (plug) or Female (socket) — select variant |
| Housing Material | PA66 nylon |
| Sealing | Waterproof (rubber wire seals + connector seal) |
| Terminal Material | Copper alloy, tin-plated |
| Wire Gauge | 0.5mm² – 1.0mm² (AWG 20–18) |
| Temperature Rating | -40°C to +125°C |
| Certification | CE |
ABS Sensor Connector — Why Waterproof Matters
| Location | Exposure | Required Sealing |
|---|---|---|
| Wheel hub / knuckle | Direct road splash, mud, salt | IP67 waterproof essential |
| Transmission tunnel | Moderate moisture | Sealed recommended |
| Engine bay (dry area) | Low moisture | Unsealed acceptable |
Why Choose This Connector?
- OEM 7283-8852-30 Specification — Exact match for original ABS sensor connector dimensions
- IP67 Waterproof — Rubber seals protect ABS sensor connections from road splash and salt water
- PA66 High-Temp Housing — Withstands brake heat and underbody temperature extremes
- Tin-Plated Terminals — Corrosion-resistant for long-term reliability in wet underbody environments
- CE Certified — Meets European automotive electrical standards
Typical Applications
- ABS wheel speed sensor connector repair (front and rear)
- ABS wiring harness pigtail replacement
- Wheel speed sensor connector for aftermarket ABS sensors
- Custom ABS wiring harness build
- Traction control and stability control sensor wiring repair
FAQ
Q: How do I know if my ABS sensor connector is faulty?
A: Common symptoms: ABS warning light, traction control light, erratic ABS activation. Inspect the connector for cracked housing, corroded terminals, or broken wire seals. A faulty connector causes intermittent or no signal from the wheel speed sensor.
Q: Do I need to replace the ABS sensor or just the connector?
A: If the sensor tests good (correct resistance/output) but the connector is damaged, replacing only the connector pigtail restores function at a fraction of the cost of a new sensor.
Package Contents
- 1× 3-Pin Sealed ABS Sensor Waterproof Connector (male or female, per selected variant)
