Low cost solution for spot cooling applications.
DESCRIPTION
These 5015 blower fans are a low cost solution for spot cooling heat sinks, 3D print heads and similar applications.
PACKAGE INCLUDES:
KEY FEATURES OF 5015 BLOWER FAN 12V:
- Power: 12VDC
- Current: 150mA
- Bearing Type: Sleeve
- Airflow: 5.9CFM (rated)
- Leads: 10″ 2-wire terminated with XH2.54-2P connector
- Noise: 30dBA (rated)
OUR EVALUATION RESULTS:
These fans put out a moderate amount of air and are commonly used for cooling print heads of 3D printer or similar spot cooling applications where you need a directed stream of air.
The fans are fairly quiet and fine for most applications.
The fan will operate over the range of 6-12VDC with reduced airflow and noise at lower voltages. Most that we have tested have responded to PWM pretty well, but some may start to sing at certain PWM values.
Notes:
- None
TECHNICAL SPECIFICATIONS
| Operating Parameters |
|
|
|
Operating Voltage |
12V |
|
Operating Current |
100-120mA |
|
Airflow |
5.9CFM (rated) |
|
Noise |
30dBA (rated) |
| Dimensions |
|
|
|
H x L x W |
50 x 50 x 15mm (2 x 2 x 0.59″) |
|
Wire length |
250mm (10″) |
| Manufacturer |
Penga Technology |
China |
Reliable JST connector cables with secure locking design, UL-certified wires, and high-quality crimping. Supports up to 3A current with compact 2.5mm pitch. Ensures stable power and signal transmission for PCB, LED, robotics, and industrial use. Custom lengths, colors, and pin counts available.
cables are made with high-purity copper wires and solid copper terminals, ensuring excellent conductivity, low resistance, and long-term reliability in power and signal transmission. Ideal for high-performance electronic applications.
