Keszoox
6-Pin 2.8mm Connector 6130-0560 / DJ7061-2.8-11/21 — Sumitomo MTW Series Automotive Wiring Plug
6-Pin 2.8mm Connector 6130-0560 / DJ7061-2.8-11/21 Sumitomo MTW Series Automotive Wiring Plug
Couldn't load pickup availability
6-Pin 2.8mm Automotive Connector — 6130-0560 / DJ7061-2.8-11/21 (Sumitomo MTW Series)
Part Numbers: 6130-0560 (Sumitomo MTW) / DJ7061-2.8-11 (female) / DJ7061-2.8-21 (male)
The Sumitomo MTW (Multi-Terminal Wire) 2.8mm series and the DJ7061-2.8-xx connector family are closely related connector platforms used extensively in Japanese OEM and Chinese domestic market vehicle wiring harnesses. The 2.8mm terminal pitch positions this connector between the compact 1.5mm signal connectors and the high-current 6.3mm power connectors — making it the workhorse of mid-current automotive circuits: fuel injectors, ignition coils, solenoid valves, sensor power supplies, and body control module outputs. The 6130-0560 / DJ7061-2.8-11/21 6-pin variant is one of the most commonly replaced connectors in automotive harness repair, found across Toyota, Honda, Nissan, Mazda, and a wide range of Chinese OEM vehicles.
Technical Specifications
- Part Numbers: 6130-0560 (Sumitomo MTW female) · DJ7061-2.8-11 (DJ female) · DJ7061-2.8-21 (DJ male)
- Pin Count: 6-pin
- Terminal Pitch: 2.8mm
- Housing Material: PA66 — heat-stabilized, oil/fuel resistant
- Terminal Material: Copper alloy, tin-plated
- Operating Temperature: -40°C to +120°C
- Current Rating: Up to 8A per pin (2.8mm terminal)
- Voltage Rating: 12V / 24V DC
- Sealing: Unsealed (standard); sealed variants available for underhood applications
- Wire Gauge: 0.5–1.25 mm² (AWG 20–16)
- Locking: Positive-latch retention tab
Common Applications
- Fuel injector connectors — multi-injector harness connectors on 4-cylinder and 6-cylinder engines
- Ignition coil pack wiring — coil-on-plug harness connectors on Toyota, Honda, and Nissan engines
- Solenoid valve connectors — VVT/VVTi solenoid, transmission solenoid, and EVAP solenoid wiring plugs
- Sensor power supply connectors — MAP sensor, MAF sensor, and throttle position sensor harness plugs
- Body control module (BCM) outputs — relay driver and actuator wiring connectors
- HVAC actuator connectors — blend door actuator and blower motor relay wiring
Vehicle Compatibility
- Toyota / Lexus: Camry (2AZ/2GR), Corolla (1ZZ/2ZR), RAV4, Prius (1NZ/2ZR), Hilux (1KD/1GD), Land Cruiser (1VD/3UR) — fuel injector and ignition coil harness connectors
- Honda / Acura: Accord (K24/J35), Civic (R18/K20), CR-V — injector and coil harness plugs
- Nissan / Infiniti: Altima (QR25/VQ35), X-Trail (MR20/QR25), Navara (YD25) — fuel system and ignition connectors
- Mazda: Mazda3/6 (L3/LF/PE), CX-5 (SkyActiv) — injector and solenoid connectors
- Chinese OEM vehicles: BYD, Geely, Chery, SAIC, Changan — using Sumitomo/DJ-compatible 2.8mm connectors in engine management systems
Global Market & Regional Notes
The 2.8mm connector pitch is the most common mid-current terminal size in Japanese automotive wiring, making the 6130-0560 / DJ7061-2.8-xx series one of the highest-volume connector families in global automotive aftermarket supply. Active demand exists across Japan, Australia, New Zealand, Southeast Asia (Thailand, Indonesia, Malaysia, Philippines, Vietnam), the Middle East (UAE, Saudi Arabia), South Africa, and China. Engine management harness repair — particularly injector and coil connector replacement on high-mileage Japanese vehicles — is a core service offering for auto electricians and engine rebuilders in all of these markets.
Installation Notes
- Disconnect the vehicle battery and depressurise the fuel system before working on injector wiring
- Use a 2.8mm terminal extraction pick — do not pull on the wire
- Inspect terminals for heat damage from proximity to exhaust components
- Apply dielectric grease to terminals in underhood locations
- Confirm injector resistance after connector replacement to verify electrical continuity
Package Contents
- 1 × 6-Pin 2.8mm Connector Housing (6130-0560 / DJ7061-2.8-11 or DJ7061-2.8-21 — select variant)
- Terminals included (confirm at checkout)
Available as individual housings or matched male/female pairs. Ideal for engine management harness repair, injector replacement, and ignition system servicing.
