Keszoox
CD4060BE DIP-16 14-Stage Binary Counter with Oscillator CMOS IC (5-Pack)
CD4060BE DIP-16 14-Stage Binary Counter with Oscillator CMOS IC (5-Pack)
Couldn't load pickup availability
CD4060BE DIP-16 14-Stage Binary Counter with Built-In Oscillator CMOS IC (5-Pack)
The CD4060BE is a 14-stage ripple binary counter with a built-in oscillator in a DIP-16 through-hole package. The onboard oscillator accepts a crystal, RC network, or external clock, and the 14 counter stages divide the input frequency by powers of 2 (from /16 to /16384), providing multiple simultaneous frequency outputs from a single IC. Supply range: 3V to 18V CMOS.
Key Specifications
| Parameter | Value |
|---|---|
| Part Number | CD4060BE |
| Package | DIP-16 |
| Counter Stages | 14-stage ripple binary counter |
| Output Pins | Q3-Q13 (Q4, Q5, Q6 not available externally) |
| Oscillator | Built-in (crystal, RC, or external clock) |
| Supply Voltage | 3V - 18V DC |
| Max Clock Frequency | ~12MHz @ VDD=10V |
| Reset Input | Active-high (MR pin) |
| Operating Temperature | -55C to +125C |
| Quantity | 5 pieces |
Frequency Division Table
| Output Pin | Division Ratio | Example (32.768kHz crystal) |
|---|---|---|
| Q3 | /16 | 2048 Hz |
| Q7 | /256 | 128 Hz |
| Q10 | /2048 | 16 Hz |
| Q13 | /16384 | 2 Hz |
| Q14 (if available) | /32768 | 1 Hz (1 pulse/second) |
Why Choose CD4060BE?
- Built-In Oscillator - No external oscillator IC needed; add crystal + 2 capacitors for stable clock
- 14 Division Stages - Multiple simultaneous frequency outputs from one IC
- Crystal Oscillator Mode - 32.768kHz watch crystal gives precise 1Hz output at Q14
- RC Oscillator Mode - Simple R+C sets frequency for non-critical timing applications
- Wide Supply Range - 3V-18V covers battery and regulated supply operation
Typical Applications
- Real-time clock frequency divider (32.768kHz to 1Hz)
- Long-duration timer (divide oscillator frequency for minutes/hours)
- Crystal oscillator + divider for microcontroller clock generation
- Frequency synthesizer building block
- Binary counter for event counting and sequencing
- Low-power sleep timer for battery-powered devices
Crystal Oscillator Circuit
Connect 32.768kHz crystal between OSC1 (pin 11) and OSC2 (pin 10). Add 22pF capacitors from each pin to GND. Connect OSC3 (pin 9) to OSC1 via 10M ohm resistor. Q14 output = 1Hz (1 pulse per second).
FAQ
Q: Why are Q4, Q5, Q6 not available on CD4060? These stages exist internally but their outputs are not connected to external pins due to DIP-16 pin count limitations. Q3 and Q7 are the adjacent available outputs.
Q: Can CD4060BE replace CD4060B? Yes - CD4060BE is the DIP-16 through-hole version of the CD4060B family. Electrically identical.
Package Contents
- 5x CD4060BE DIP-16 14-Stage Binary Counter IC
