- Choosing a selection results in a full page refresh.
The shipping fee depends on your address
Standard: 9-15 business days，fee is down to $3.99
Express: 4-7 business days，fee is down to $5.99
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
If you're looking for a custom product, we can help. Kindly contact us via email support@keszoox.com and send us the details for your need, then we'll let you know how we can deliver the right solution.We make into production usually Within 1 - 3 Bussiness Days.
Expect customization orders.USB Mini-B or DC input with 5V and 3.3V output.
This compact module accepts USB Mini-B connector and provides 5V and 3.3V output as well as access to the USB data lines. It will also accept a DC power jack input.
This module is mainly designed to supply 5V and 3.3V power to a circuit using a mini USB cable. The 5V from the USB is used to power an AMS1117-3.3V regulator and both the 5V USB power and 3.3V from the regulator are available on the output pins. The total maximum power that can be drawn is about 500mA and limited by the USB.
The module also breaks out the three data pins of the USB connector (+D, -D and ID) so that they can be tapped into if desired.
Besides the USB connector, the module also will accept a standard DC power plug which can be used to provide power. In this case, 5-12V is input on the DC power jack and the same voltage is available on the 5V output pin. It is also passed to the 3.3V regulator which provides a 3.3V output. In this mode, the maximum power available on the 3.3V pin will depend on the input voltage. With an input of 5V, it can support approximately 500mA. with an input of 12V, it will be limited to about 150mA due to increased thermal load on the regulator from the increased voltage drop.
If using the DC power jack, a 5V input generally works the best since it provides 5V on the 5V output, minimizes heating of the 3.3V regulator and it is also less likely to cause damage if both the USB and DC jack are accidentally inserted at the same time.
Note: Do not connect an active USB cable and DC power jack at the same time as the USB 5V and DC power jack input voltage will be shorted together. Also keep in mind that if you are using the module with something other than a 5V input, the voltage on the 5V output pin will be whatever the input voltage is.
The module has a 6-pin header location. A 6-pin male header is provided which can be soldered to the top or bottom of the board depending on planned usage or wires can be attached.
1 x 6 Header
Notes:
| Maximum Ratings | ||
| VIN | Maximum Input Voltage | 12V |
| Minimum Input Voltage | 5V | |
| Operating Ratings | ||
| IO | Output Current (max continuous) | 500mA (see notes above) |
| Dimensions | L x W x H | 25 x 25 x 15mm (1 x 1 x 0.59″) |
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
All orders are dispatched from our warehouse. The shipments are fully tracked—from our door to yours. Please allow 3-5 business days for your order to be processed in addition to the shipping times below.
Standard: 9-15 business days. Express: 4-7 business days.
Please note that shipping providers are extremely busy during this time, and some orders might experience a delay on top of usual delivery times. If your order is late, please allow 5-10 days more than indicated in standard shipping times before contacting our customer service. Thank you for your understanding.
All orders are 100% tracked. You’ll receive an email with a tracking number and a link to track your parcel once your order leaves our warehouse. Please allow 24-48 hours for the tracking link to start showing shipping information.
Receive our latest updates about our products & promotions.
Thanks for subscribing!
This email has been registered!