Features:
*PID controller set comes with digital PID REX-C100 temperature controller + max.40A for SSR + K Thermocouple for your use.
*This PID temp control is specially designed for phase solid state relay.
*Proportional Bands (P): 0～full r-ange (ON/OFF control when set to 0).
*Integral t-ime (I): 0～3600 sec (no integral actions when set to 0), derivative t-ime (D): 0～3600 sec (no derivative actions when set to 0).
*Setting value (SV) is identical to measuring r-ange (PV).
*Detective temperature range: 0 to 400℃

Specifications:
REX-C100 Temperature Controller
1.3 Digit setup values
2.Measuring accuracy: ±0.5%FS
3.Cold-end compensation tolerance: ±2℃（can be modified by software in 0～50℃）
4.Resolution: 14 bit
5.Sampling cycle: 0.5 Sec
6.P-ower: AC 220V 50/60HZ
7.Process value (PV), Setting value (SV)
8.Output, and self-tuning can be indicated by: L-ED
9.PIN control (including ON/OFF, step-type PID and continuous PID)
10.Self-tuning control
11.Relay output: contact capacity 250-V AC 3A (resistive load)
12.Proportional band (P): 0～full r-ange (ON/OFF control when set to 0)
13.Detective temperature r-ange: 0 to 400℃
14.Insulation resistance: >50M ohm(500V D-C)
15.Insulation resistance: 1500V AC/min
16.Insulation resistance: P-ower Consumption < 10 VA
17.Service environment: 0～50℃
18.Environment with no corrosive g-as 30～85% RH

K Thermocouple Probe Cable:
1.Length: 1M
2.Sensor diameter: 4.5mm
3.Temperature r-ang :0～400℃
4.Internal Insulation: Fiberglass
5.External Shielding: Insulated Shielding

Max.40A for SSR:
1.Output Current: 40A
2.Input Voltage: D-C 3-32V
3.Output Voltage: 24-380V AC
4.Output Voltage R-ange: Standard Type
Item Size: 48 * 12 * 12mm / 1.89 * 0.47 * 0.47in
Package Weight: 276g / 9.74ounces
Package Size: 80 * 62 * 40mm / 3.15 * 2.44 * 1.57in

Packing List:
1 * PID Temperature Controller
1 * K Type Probe Sensor
1 * 40DA for SSR

Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.