Keszoox
DJ70216C-2.8-11/21 Automotive 2-Pin Waterproof Electrical Connector OEM 936291-2 936248-2
DJ70216C-2.8-11/21 Automotive 2-Pin Waterproof Electrical Connector OEM 936291-2 936248-2
Couldn't load pickup availability
DJ70216C-2.8-11/21 Automotive 2-Pin Waterproof Electrical Connector
The DJ70216C-2.8-11/21 is a CE-certified, waterproof 2-pin automotive connector with a 2.8mm pitch. Cross-referenced to OEM part numbers 936291-2 and 936248-2, it provides a precise factory replacement for vehicle sensor and signal wiring harnesses.
Key Specifications
| Parameter | Value |
|---|---|
| Model | DJ70216C-2.8-11 (male) / DJ70216C-2.8-21 (female) |
| OEM Cross Reference | 936291-2 / 936248-2 |
| Pin Count | 2 |
| Pitch | 2.8mm |
| Housing Material | PA66 (Nylon 66) |
| Terminal Material | Copper alloy, tin-plated |
| Seal | 2× individual rubber wire seals |
| Waterproof | Yes |
| Certification | CE |
Why Choose This Connector?
- ✅ OEM cross-reference 936291-2 / 936248-2 for direct factory replacement
- ✅ CE certified for automotive-grade reliability
- ✅ Individual rubber wire seals for waterproof protection per pin
- ✅ PA66 housing withstands automotive heat, oil, and vibration
- ✅ Matched male/female pair for complete harness repair
Typical Applications
- OEM harness repair for vehicles using 936291-2 / 936248-2 connector spec
- Engine sensor wiring (coolant temp, MAP, TPS)
- ABS and wheel speed sensor connector repair
- Body control module (BCM) harness connections
- General 2.8mm pitch 2-pin waterproof automotive connector applications
Compatible With
Vehicles using OEM part numbers 936291-2 or 936248-2. Fits 18–22 AWG wire. Commonly found in European and Asian-market vehicles using Delphi/Aptiv 2.8mm connector series.
FAQ
Q: What OEM part numbers does this replace?
A: This connector replaces OEM part numbers 936291-2 (male) and 936248-2 (female), used in various vehicle sensor wiring harnesses.
Q: What is the difference between -11 and -21 suffix?
A: The suffix "-11" denotes the male plug and "-21" denotes the female socket. Both are required for a complete mated pair.
Q: What wire gauge is compatible?
A: Designed for 18–22 AWG wire, standard for automotive sensor and signal circuits.
Package Contents
- Option A: 1× Male connector + 1× Female connector + 2× terminals + 2× rubber seals
- Option B: 1× Pre-wired connector set with 15cm harness
