DuPont 2.54mm Male-to-Female 2–12Pin Ribbon Cable 22AWG UL1007 PVC

DuPont 2.54mm Male-to-Female Ribbon Cable — 2–12 Pin, 22AWG UL1007

The DuPont 2.54mm male-to-female ribbon cable is the essential multi-conductor extension cable for Arduino, Raspberry Pi, and electronics prototyping. With male pins on one end and female sockets on the other, it bridges GPIO headers to breadboards, extends pin headers to sensor modules, and routes multi-wire signals cleanly across your workbench.

Available in 2 to 12-pin configurations, color-coded for instant identification, and built to UL1007 PVC standards with 22AWG stranded copper rated at 3A / 250V.

Key Features

• Male-to-female on opposite ends — extends pin headers, bridges GPIO to breadboard, connects modules to development boards
• 2 to 12-pin options — covers I2C, SPI, UART, and multi-channel sensor wiring in a single organized ribbon
• 2.54mm (0.1") pitch — universal standard for Arduino, Raspberry Pi, ESP32, STM32, and all standard headers
• Color-coded ribbon — each conductor is a distinct color for fast, error-free polarity and signal identification
• 22AWG stranded copper — flexible, low-resistance, handles repeated bending without fatigue
• UL1007 PVC insulation — rated −25°C to +80°C, flame-retardant, RoHS compliant
• 3A / 250V rating — suitable for both signal and low-current power lines

Typical Applications

• Extending Raspberry Pi 40-pin GPIO to breadboard or sensor modules
• Arduino to LCD / OLED display module wiring
• Stepper motor driver signal connections (A4988, DRV8825)
• I2C bus wiring: SDA, SCL, VCC, GND (4-pin)
• SPI bus wiring: MOSI, MISO, SCK, CS (4-pin)
• UART wiring: TX, RX, VCC, GND (3–4 pin)
• Custom multi-wire harness assembly for prototyping rigs

Technical Specifications

• Connector Type: Male-to-Female (M-F)
• Pin Count: 2–12 (select variant)
• Pitch: 2.54 mm (0.1")
• Wire Gauge: 22 AWG
• Conductor: Stranded copper
• Insulation: UL1007 PVC
• Voltage Rating: 250V AC/DC
• Current Rating: 3A per conductor
• Temperature Range: −25°C to +80°C
• Contact Material: Tin-plated brass
• RoHS Compliant: Yes
• Brand: Keszoox
• Origin: Mainland China

Frequently Asked Questions

Q: Can I use this to connect a Raspberry Pi to a breadboard?
A: Yes. The male end plugs into the Raspberry Pi GPIO header, and the female end connects to breadboard-mounted pin headers or sensor modules.

Q: Can the ribbon be separated into individual wires?
A: Yes. The ribbon conductors can be peeled apart for individual routing while keeping the connectors intact.