Skip to product information
1 of 5

Keszoox

Joystick Module Acrylic Case

Joystick Module Acrylic Case

Regular price $1.49 USD
Regular price $2.49 USD Sale price $1.49 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.

Provides an enclosure / base for the common joystick module.

Description

The Joystick Module Acrylic Case provides an enclosure / base for the common PS2 style joystick module.

PACKAGE INCLUDES:

  • 3 pieces acrylic
  • 4 screws

OUR EVALUATION RESULTS:

Joysticks are handy for many projects, but they do tend to dangle around in the breeze when working with them on the bench.  This acrylic case provides a nice base for the joystick and it can itself be screwed down to something if desired.

To assemble, follow the steps below.  Note that we are leaving the protective paper on to make it easier to see the features of the individual acrylic pieces, but you will want to remove the paper before assembling the unit.

Steps to Assemble

Peel the protective paper layer off the acrylic pieces and layout the pieces as shown below.

Joystick Module Acrylic Case - Assy Step 1

Place the joystick module on the center piece which has the cutout to clear the header pins sticking through the module.

Joystick Module Acrylic Case - Assy Step 2

Now place the solid piece on the left under the piece that is supporting the joystick module.  The 4 holes in the corners are threaded.  The 2 holes towards the middle are not used by the case but could be used to attach the case to a substrate of some type.

Joystick Module Acrylic Case - Assy Step 3

Next place the piece on the right over the top of the joystick module.  Note that the cutout at the top of this piece is slightly narrower and deeper than at the bottom in order to clear a feature on the joystick.  If the piece doesn’t fit over the joystick, try flipping it over.

Joystick Module Acrylic Case - Assy Step 4

Install the 4 screws from the top and tighten them snugly.  Since you are screwing into threads in the bottom acrylic piece, don’t get too heavy handed while tightening to avoid possibly stripping the threads out.

Joystick Module Acrylic Case - Assy Step 5

Once tightened, the screws may extend down past the bottom of the acrylic enclosure a small amount.  Small rubber feet can be added to avoid the screws possibly scratching the surface the module sits on and they will also help keep the enclosure from sliding on a smooth surface when the joystick is being used.

BEFORE THEY ARE SHIPPED, THESE MODULES ARE:

  • Inspected for completeness

Notes:  

  1. None

Technical Specifications

Dimensions
L x W x H (enclosure) 45 x 45 x 9mm (1.78 x 1.78 x 0.35″)
Material 2.4mm Clear Acrylic
View full details