Keszoox
JST XH 2.5mm Connector Kit — Housing & PCB Header Assortment with 22AWG Pre-Crimped Wires
JST XH 2.5mm Connector Kit Housing & PCB Header Assortment with 22AWG Pre-Crimped Wires
Couldn't load pickup availability
JST XH 2.5mm Connector Kit — Housing & PCB Header Assortment with 22AWG Pre-Crimped Wires
A comprehensive JST XH 2.5mm connector kit covering housings, PCB headers, and 22AWG pre-crimped wire assemblies in assorted pin counts. The JST XH 2.5mm is the global standard for 3D printer mainboard wiring, RC battery balance leads, and Arduino wire-to-board connections. Rated 3A / 250V AC/DC with SXH-001T-P0.6N contacts, this kit provides everything needed for both wire-to-board (header + cable) and wire-to-wire (housing + housing) configurations.
Whether you're building a 3D printer, wiring an RC battery pack, or prototyping an Arduino project, the JST XH 2.5mm is the connector you'll reach for most often. This kit eliminates the need to source housings, headers, and cables separately — everything is in one package, ready to use.
Key Specifications
- Series: JST XH | Pitch: 2.5mm | Contact: SXH-001T-P0.6N
- Wire gauge: 22AWG | Current: 3A | Voltage: 250V AC/DC
- Housing material: PA nylon, UL94 V-0 | Contact material: Phosphor bronze, tin-plated
- Operating temperature: -25°C to +85°C | Compliance: RoHS
- Notes: Used by many radio control (R/C) batteries as the standard balance connector
Why Choose This Kit?
- ✅ JST XH 2.5mm standard — the most widely used connector in 3D printer mainboards, RC batteries and Arduino projects
- ✅ Housings + PCB headers + pre-crimped cables — complete wire-to-board and wire-to-wire solution in one kit
- ✅ 22AWG pre-crimped cables — ready to insert, no crimping tool required
- ✅ SXH-001T-P0.6N contact — phosphor bronze, tin-plated, 3A / 250V AC/DC rated
- ✅ Positive-lock housing — locking latch prevents accidental disconnection under vibration
- ✅ RoHS compliant — PA nylon housing, tin-plated copper contacts
Typical Applications
- 3D printer mainboard thermistor, fan, endstop, and stepper motor connections
- RC model and drone battery balance lead connections
- Arduino and development board wire-to-board connections
- Stepper motor driver signal and power wiring
- LED strip and lighting control board connections
- DIY electronics prototyping and production harness assembly
Compatibility
Compatible with all JST XH 2.5mm series housings (XHR), PCB headers (B-XH-A), and SXH-001T-P0.6N pre-crimped wire assemblies. Also compatible with third-party XH 2.5mm equivalent housings and cables from other manufacturers.
