These 3W LEDs have a color spectrum of 600-605nm which is considered orange.
DESCRIPTION
These 3W LEDs have a color spectrum of 600-605nm which is considered orange.
PACKAGE INCLUDES:
- Qty 10 – LED 3W Orange 600-605nm
KEY FEATURES OF LED 3W ORANGE 600-605NM:
- 600-605nm wavelength which is orange
- ± 60° viewing angle
- 700mA max drive current
- Bridgelux or Epistar LED chips
These LEDs are popular for DIY projects where an orange color is desired.
Calculating LED Resistor Values
These LEDs are primarily designed to be used with a constant current LED driver like the Meanwell LDD-700 but can be driven off other circuits that have some form of current limiting to avoid damage to the LEDs or the driving source.
For experimentation, the device can be driven at lower brightness directly off the pins of an MCU with a suitable current limiting series resistor.
| Color | Max Power | Wavelength | Max Forward Current | Forward Voltage | Luminous Flux | LED Chip Size |
| Orange | 3W | 600-605nm | 600-700mA | 2.0 – 2.4V | 80-100 | 42mil |
The LEDs can get quite hot when driven at full power. For high power applications, the LEDs should be placed on a suitable heat sink with thermal paste to avoid possible overheating.
Most 
commonly, these individual LEDs are soldered to an aluminum star type heat sink which is then mounted to a larger piece of aluminum or larger heat sink assembly. Point-to-point wiring can then be used to connect the LEDs.
When soldering the LED to the star board, it is critical to use thermal paste between the body of the LED and the center pad on the star board. This is to ensure efficient heat transfer from the LED to the star board. If using hot air or a hot plate to reflow the solder to mount the LED, it is possible to use solder paste under the LED to solder the LED to the center pad rather than using thermal paste. The solder provides ideal thermal coupling.
The LEDs are typically wired in a serial chain powered by a constant current LED driver which can be PWM controlled to adjust LED brightness. The driver output voltage must be large enough to account for the voltage drop across all the LEDs in the chain.
Notes:
- None
TECHNICAL SPECIFICATIONS
| Type | Single Color | |
| Color | Orange 600-605nm | |
| Lens | Shape | Circular |
| Dimensions (lens only) | 5.9 x 5.9 x 2.8mm | |
| Appearance | Clear | |
| Power | Maximum | 3W |
| Viewing Angle | To Half Brightness | ± 60 Degrees |
| Maximum Ratings | ||
| IF | Maximum Forward Current | 700mA |
| VF | Maximum Forward Voltage | 2.0 – 2.4V |
| Package Type | Plastic body, 2-lead, SMD | |
| Package Dimensions | Diagonal x lead-to-lead x height | 8mm x 14.5mm x 5.3mm |
| Mfr | LED wafers | Epistar or Bridgelux |
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
- Contact us:
- Support@keszoox.com
- What we can help:
- If you're looking for a wire or cable assembly, we can help.
- What we need your help next:
- Kindly contact us via email support@keszoox.com and send us the details fo your need, then we'll let you know how we can deliver the right solution.
Shipping Policy
All orders are dispatched from our warehouse. The shipments are fully tracked—from our door to yours. Please allow 3-5 business days for your order to be processed in addition to the shipping times below.
Shipping Times
Standard: 9-15 business days. Express: 4-7 business days.
Please note that shipping providers are extremely busy during this time, and some orders might experience a delay on top of usual delivery times. If your order is late, please allow 5-10 days more than indicated in standard shipping times before contacting our customer service. Thank you for your understanding.
Tracking
All orders are 100% tracked. You’ll receive an email with a tracking number and a link to track your parcel once your order leaves our warehouse. Please allow 24-48 hours for the tracking link to start showing shipping information.
- Choosing a selection results in a full page refresh.