- Choosing a selection results in a full page refresh.
The shipping fee depends on your address
Standard: 9-15 business days，fee is down to $3.99
Express: 4-7 business days，fee is down to $5.99
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
If you're looking for a custom product, we can help. Kindly contact us via email support@keszoox.com and send us the details for your need, then we'll let you know how we can deliver the right solution.We make into production usually Within 1 - 3 Bussiness Days.
Expect customization orders.The Leonardo is a clone compatible version of the Arduino Leonardo. The Leonardo is similar to the Uno but offers some additional functionality. It has 20 digital I/O pins of which 7 can be used as PWM outputs and it has up to 12 Analog inputs.
Leonardo differs from most other Arduino boards in that the ATmega32U4 processor has a built-in USB port, thus eliminating the need for a secondary USB processor. The plus side of this is that it can appear to a connected computer as a keyboard, mouse or other USB device. The Leonardo has a USB Micro-B connector.
Compared to the UNO, the Leonardo has the same memory and performance, but has a slightly larger larger number of digital, PWM and analog pins. The SPI interface however is only available on the ICSP header pins.
Leonardo operates at 5V which can be supplied via the USB port connection. If an external 7-12V power supply is used, the power should be input on the DC jack that feeds an on-board 5V regulator. Our 7.5V AC adapter works extremely well for powering these boards.
There is a green power LED on the board and 2 red LEDs which show activity on the TX/RX lines as well as the typical software controllable yellow LED on pin 13.
Like all Arduino and compatible boards, it can be programmed using the Arduino IDE via the USB port. To program with the Arduino IDE, use board type: ‘Arduino Leonardo’.
These are clone assemblies with good build quality
Because of the Leonardo architecture where the main processor is also the USB port, the PC may reassign (re-enumerate) the COM port if the board is reset or between downloads. If you experience issues with downloading, ensure that the current COM port is selected in the IDE. The COM port will generally identify the device as ‘Leonardo’.
Additional Info on Arduino.cc website
Notes:
| Microcontroller | ATmega32U4 | |
| Serial to USB Converter | Built-in Native USB | |
| Operating Voltage | 5V | |
| Input Voltage (recommended) | 7-12V | |
| Digital I/O Pins | 20 | |
| PWM I/O Pins (Shared with Digital I/O) | 7 | |
| Analog Input Pins | 12 | |
| DC Current per I/O Pin | 40mA (Max) 20mA (Typ) | |
| Hardware Serial Ports | 1 | |
| Flash Memory | 32 KBytes | |
| SRAM | 2.5 KBytes | |
| EEPROM | 1 KBytes | |
| Clock Speed | 16MHz | |
| Power Consumption | ||
| Built-in LED | Attached to digital pin 13 | |
| USB Connector Style | Micro-B Female | |
| Board Dimensions (PCB) | 69 x 53mm (2.7 x 2.1″) | |
| Board Dimensions (with connector overhang) | 70 x 53mm (2.76 x 2.1″) | |
| Country of Origin | China |
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
All orders are dispatched from our warehouse. The shipments are fully tracked—from our door to yours. Please allow 3-5 business days for your order to be processed in addition to the shipping times below.
Standard: 9-15 business days. Express: 4-7 business days.
Please note that shipping providers are extremely busy during this time, and some orders might experience a delay on top of usual delivery times. If your order is late, please allow 5-10 days more than indicated in standard shipping times before contacting our customer service. Thank you for your understanding.
All orders are 100% tracked. You’ll receive an email with a tracking number and a link to track your parcel once your order leaves our warehouse. Please allow 24-48 hours for the tracking link to start showing shipping information.
Receive our latest updates about our products & promotions.
Thanks for subscribing!
This email has been registered!