- Choosing a selection results in a full page refresh.
The shipping fee depends on your address
Standard: 9-15 business days，fee is down to $3.99
Express: 4-7 business days，fee is down to $5.99
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
If you're looking for a custom product, we can help. Kindly contact us via email support@keszoox.com and send us the details for your need, then we'll let you know how we can deliver the right solution.We make into production usually Within 1 - 3 Bussiness Days.
Expect customization orders.General purpose single-channel audio amplifier module that can handle up to 325mW.
The LM386 Audio Ampifier Module is a general purpose single-channel audio amplifier that can handle up to 325mW.
The LM386 audio amplifier module is handy for providing basic audio amplification in a project.
The amplifier IC are LM386M-1 parts. They operate at 4V – 12V and provide up to 325mW of power. The output can drive loads from 4 to 32 ohms. The lower the resistance of the load, the more power it can provide, so a 4 ohm speaker will be about twice as loud as an 8 ohm speaker.
The gain is fixed at 200x, but volume can be adjusted using the potentiometer on the module which adjusts the signal level fed to the LM386 IC.
These are single channel (mono) devices, so two would be needed for stereo amplification.
These assemblies work reasonably well at basic audio amplification tasks but can quickly distort if over-driven. They can be used for lower volume music amplification such as headphones and can do a decent job, but they are best suited for providing amplification for things like sound affects where exact sound reproduction is not a high priority.
The potentiometer on the module adjusts the level of the input signal and the amplifier has a fixed gain of 200x. If the input is from something like a MCU PWM pin with 5V levels, the potentiometer acts more like an on/off switch than a volume control and the output will be heavily distorted at higher levels.
In many cases, a resistor divider can be used to lower the input amplitude down to a couple hundred millivolts which is more in the amplifiers comfort zone and the potentiometer will act more like a volume control.
If the 0 ohm resistor at location R1 is removed, the fixed amplification will drop to 20x which might be useful in some applications. This value can be changed per the datasheet to adjust the gain between 20x and 200x
If you are looking for a more capable stereo audio amplifier solution, take a look at our PAM8403 stereo module down below.
Notes:
| Operational Ratings | ||
| Vs | Vcc Power Range | 4-12V |
| Vi | Voltage on input pins | -0.4 to 0.4V |
| Pmax | Maximum output power | 325mW (typ) |
| Load | 4 Ohm – 32 Ohm | |
| Dimensions | ||
| PCB (L x W) | 41 x 14mm (1.6 x 0.55″) | |
| Country of Origin | China | |
| Datasheet | LM386 |
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
All orders are dispatched from our warehouse. The shipments are fully tracked—from our door to yours. Please allow 3-5 business days for your order to be processed in addition to the shipping times below.
Standard: 9-15 business days. Express: 4-7 business days.
Please note that shipping providers are extremely busy during this time, and some orders might experience a delay on top of usual delivery times. If your order is late, please allow 5-10 days more than indicated in standard shipping times before contacting our customer service. Thank you for your understanding.
All orders are 100% tracked. You’ll receive an email with a tracking number and a link to track your parcel once your order leaves our warehouse. Please allow 24-48 hours for the tracking link to start showing shipping information.
Receive our latest updates about our products & promotions.
Thanks for subscribing!
This email has been registered!