- Choosing a selection results in a full page refresh.
The shipping fee depends on your address
Standard: 9-15 business days，fee is down to $3.99
Express: 4-7 business days，fee is down to $5.99
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
If you're looking for a custom product, we can help. Kindly contact us via email support@keszoox.com and send us the details for your need, then we'll let you know how we can deliver the right solution.We make into production usually Within 1 - 3 Bussiness Days.
Expect customization orders.Basic smart car chassis kit with room to mount accessories.
This is a basic long smart car chassis kit with 4-wheel drive that has plenty of room to mount motor controllers, MCUs, sensors and other accessories.
The two acrylic platforms are identical
The platforms have many mounting holes to facilitate mounting electronics, battery packs and similar. Being acrylic, it is easy to drill additional holes as required using a standard drill bit to fit whatever you might want to fit.
The motors are DC motors that will work between 3-12VDC. Speed of rotation will depend on the voltage and whether a PWM motor controller is added for speed and direction control. The motor wires will need to be soldered to the motors, so a soldering iron is required.
These make an inexpensive platform to get started with robotic controls. The kit includes the essentials to put together a motorized platform, but it does not include any of the control electronics. Those can be ordered separately if they are required.
The acrylic is 2mm thick, so use some care when assembling or if drilling new holes in order to not crack the acrylic.
The basic kit is straightforward to assemble by referring to the pictures. You will want to assembly the bottom platform with the motors and wheels before adding the top platform.
The motors do tend to run on the fast side when powered straight off of DC voltage, so unless you are building a speed racer, you should plan on running the motors at a lower voltage if driving them directly. At 3V, the motors run at about 100RPM with a medium load. Most often, a PWM based motor controller is used to provide MCU control of the speed as well as to allow for reversing direction of the motors. When used with a motor controller, 6-12V power is generally used.
Notes:
| Operating Ratings | ||
| Motor Voltage | 3 – 12VDC | |
| Motor Current | 140mA (typical) | |
| Gear Reduction Ratio | 1:48 | |
| Motor Speed | 5V (No Load) | 180 RPM |
| 3V (No Load) | 120 RPM | |
| Dimensions | ||
| Chassis (L x W x H) | 260 x 150 x 69mm (10.2 x 5.9 x 2.7″) | |
| Tires (H x W) | 66 x 25mm (2.6 x 1″) | |
| Motor (L x W X H) | 70 x 22 x 18mm (2.8 x 0.9 x 0.7″) |
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
All orders are dispatched from our warehouse. The shipments are fully tracked—from our door to yours. Please allow 3-5 business days for your order to be processed in addition to the shipping times below.
Standard: 9-15 business days. Express: 4-7 business days.
Please note that shipping providers are extremely busy during this time, and some orders might experience a delay on top of usual delivery times. If your order is late, please allow 5-10 days more than indicated in standard shipping times before contacting our customer service. Thank you for your understanding.
All orders are 100% tracked. You’ll receive an email with a tracking number and a link to track your parcel once your order leaves our warehouse. Please allow 24-48 hours for the tracking link to start showing shipping information.
Receive our latest updates about our products & promotions.
Thanks for subscribing!
This email has been registered!