Keszoox
DJ622-F0.4A / DJ612-F0.4A Automotive 0.4mm Splice Terminal — 917308-1 | Male Female | 50PCS
DJ622-F0.4A / DJ612-F0.4A Automotive 0.4mm Splice Terminal 917308-1 | Male Female | 50PCS
Couldn't load pickup availability
DJ622-F0.4A / DJ612-F0.4A Automotive 0.4mm Splice Crimp Terminal — 917308-1
Ultra-fine 0.4mm series automotive splice crimp terminals (DJ622-F0.4A female / DJ612-F0.4A male, cross-reference 917308-1) for high-density automotive ECU and control module wiring harness applications. These precision-stamped terminals are designed for the smallest-pitch automotive connector systems, delivering reliable electrical contact with minimal insertion force and consistent crimp retention in fine-wire signal circuits. Compatible with 0.4mm series automotive connector housings used in modern ECU, BCM, and sensor wiring harnesses. Supplied in a 50PCS pack.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Numbers | DJ622-F0.4A (Female) / DJ612-F0.4A (Male) / 917308-1 |
| Terminal Pitch | 0.4mm series (ultra-fine pitch) |
| Gender | Female (DJ622-F0.4A) / Male (DJ612-F0.4A) |
| Material | Copper alloy, tin-plated |
| Wire Range | 0.08–0.13mm² (AWG 28–26) |
| Pack Quantity | 50PCS |
| Certification | CE |
| Origin | Mainland China |
Key Features
- ✅ 0.4mm ultra-fine pitch — smallest standard automotive terminal pitch for high-density ECU and control module connectors
- ✅ Male and female variants — DJ622-F0.4A (female) and DJ612-F0.4A (male) for complete connector assembly
- ✅ 917308-1 cross-reference — compatible with Tyco / TE Connectivity 917308-1 series connector applications
- ✅ Tin-plated copper alloy — low contact resistance, corrosion-resistant, reliable long-term performance
- ✅ CE certified — meets European automotive electrical component standards
Common Applications
- High-density automotive ECU connector terminal replacement
- Body control module (BCM) fine-wire harness repair
- Automotive sensor circuit ultra-fine pitch connector re-termination
- Modern vehicle infotainment and ADAS wiring harness repair
- Custom high-density automotive wiring harness fabrication
Crimping Guide
- Strip 2–3mm of insulation from the wire end (use a precision wire stripper for fine gauge wire).
- Insert the wire into the terminal crimp barrel under magnification.
- Crimp using a precision ratchet crimping tool with the appropriate 0.4mm series die.
- Inspect the crimp under magnification to verify correct engagement.
- Insert the crimped terminal into the connector housing until it clicks into the retention position.
FAQ
Q: What wire gauge is compatible?
A: DJ622-F0.4A / DJ612-F0.4A terminals are designed for 0.08–0.13mm² (AWG 28–26) ultra-fine wire, typical for modern automotive ECU signal circuits.
Q: Do I need a special crimping tool?
A: Yes. Ultra-fine 0.4mm pitch terminals require a precision ratchet crimping tool with the correct die. Hand crimping will produce unreliable results.
Package Contents
- 50× DJ622-F0.4A / DJ612-F0.4A 0.4mm Automotive Splice Crimp Terminal (Male or Female, as selected)
