The shipping fee depends on your address
Standard: 9-15 business days,fee is down to $3.99
Express: 4-7 business days,fee is down to $5.99
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
If you're looking for a custom product, we can help. Kindly contact us via email support@keszoox.com and send us the details for your need, then we'll let you know how we can deliver the right solution.We make into production usually Within 1 - 3 Bussiness Days.
Expect customization orders.CUI CMC-9745-44P omnidirectional 9.7mm diameter condenser microphone
This is a CUI CMC-9745-44P omnidirectional 9.7mm diameter condenser microphone with PCB leads that are breadboard compatible.
This is a miniature condenser microphone that is used for converting acoustical energy (sound) into electrical energy. Condenser is the old term for capacitor and these microphones use a capacitor type construction to detect sound. When sound waves hit the microphone diaphragm, it changes the distance of the two capacitor plates and therefore the capacitance which in turn changes the electrical output of the microphone . Condenser mics are more sensitive and have greater dynamic range than similar dynamic microphones.
Condenser microphones are powered, so they require a working voltage of 3 – 10VDC along with a couple of external components including a load resistor and a capacitor to AC couple the output.
This microphone has two 4.5mm long PCB leads on the back with standard 0.1″ (2.54mm) spacing. They are long enough to work well in a solderless breadboard.
Terminal 1 is the output and is connected to the power source via a resistor with a value of 2.2K.
A series capacitor with a value of approximately 1uf – 10uF is placed on the output. This output may be fed into an audio amplifier of some type to boost the signal or feed the analog input of a microcontroller.
Terminal 2 is connected to the system ground.
These mics work well for adding sound detection to a project.
Below is a scope capture using the circuit shown in the schematic. Power to the mic is 5V and the scope is set for 10mV/div. Input is a whistle
Notes:
Specifications | ||
Frequency | 20Hz-20kHz | |
Directivity | Omnidirectional | |
Sensitivity | -44dB ± 3dB | |
S/N Ratio | 60dB | |
Operating Voltage | 3V typical, 10V max | |
Output Impedance | 2.2k Ohm | |
Dimensions | Dia x H | 9.7 x 4.5mm (0.382 x 0.177″) |
Mfr | CUI | |
Datasheet | CMC-9745-44P |
WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.
All orders are dispatched from our warehouse. The shipments are fully tracked—from our door to yours. Please allow 3-5 business days for your order to be processed in addition to the shipping times below.
Standard: 9-15 business days. Express: 4-7 business days.
Please note that shipping providers are extremely busy during this time, and some orders might experience a delay on top of usual delivery times. If your order is late, please allow 5-10 days more than indicated in standard shipping times before contacting our customer service. Thank you for your understanding.
All orders are 100% tracked. You’ll receive an email with a tracking number and a link to track your parcel once your order leaves our warehouse. Please allow 24-48 hours for the tracking link to start showing shipping information.
Receive our latest updates about our products & promotions.
Thanks for subscribing!
This email has been registered!