PCB, SOIC/TSSOP-20 to DIP Adapter ENIG w/ Pins

Adapts 20-pin SOIC and TSSOP packages to 0.6″ DIP footprint

DESCRIPTION

This adapter has an ENIG finish and can mount a 20-pin SOIC-20 IC on one side or a TSSOP-20 IC on the other side and convert it to a 0.6″ wide DIP-20 footprint.  It comes with machined round pins.

PACKAGE INCLUDES:

• Qty 1 – PCB, SOIC/TSSOP-20 to DIP Adapter, ENIG
• Qty 2 – 1×10 Machined Round Pins

KEY FEATURES OF PCB, SOIC/TSSOP-20 TO DIP ADAPTER ENIG:

• Mounts SOIC-20, TSSOP-20 and similar package types
• ENIG (Electroless Nickel Immersion Gold) finish
• Trace width 0.010″ with 0.020″ width on corner pins
• 1.6mm / 0.62″ FR-4 construction
• Includes machined round gold plated pins (Swiss machined pin) headers

This adapter board can mount 20-pin SMD components that either have a 0.65mm or a 1.27mm lead spacing and convert it to a 20-pin 0.6″ DIP footprint with pins on 2.54mm (0.1″) centers for use with breadboards, perf boards and IC sockets.  It is designed for SOIC-20 and TSSOP-20 packages, but it may fit other packages such as SSOP that share the same lead pitch.  Refer to the pad dimensions to determine suitability for mounting a particular package type.

You can also mount packages with fewer than 20 pins on the adapter, but keep in mind that the pinout will not be 1:1.

The board is double-sided to support the two different SMD pin pitches.  The header pins can be soldered to either side of the board and are typically used with machined round female headers or can be soldered to a PCB board.

Please note that the DIP footprint is 0.6″ centers.

High Quality Finish

The boards are constructed of 1.6mm FR-4 with 1oz copper and green solder mask.  A 0.010″ trace width is used with heavier duty 0.020″ traces on the corner pins which normally carry power and ground connections.

The copper has an ENIG (Electroless Nickel Immersion Gold) finish for maximum performance.  ENIG ensures extended shelf life against corrosion and provides excellent solderability with lead or lead-free solder.  It also provides a completely flat soldering surface which is important with surface mount ICs.  It is also fully ROHS compliant.

Notes: 

1. None

TECHNICAL SPECIFICATIONS