Resistor 12K Ohm 5% 1/4W (25-Pack)
Resistor 12K Ohm 5% 1/4W (25-Pack)
Compatible JST cables for sensors and modules — secure & reliable. Shop now.
Couldn't load pickup availability
12K Ohm 1/4W 5% Carbon Film Resistor — 25-Pack
A 25-piece pack of 12KΩ (12,000 ohm) carbon film resistors rated at 1/4W (0.25W) with ±5% tolerance. The 12KΩ value is widely used in pull-up and pull-down resistor networks, voltage divider circuits, RC timing circuits, and general-purpose signal conditioning in Arduino, ESP32, and embedded electronics projects. Carbon film construction provides stable resistance over temperature and good noise performance for general-purpose analogue and digital circuit applications.
Technical Specifications
| Parameter | Value |
|---|---|
| Resistance | 12KΩ (12,000Ω) |
| Tolerance | ±5% (J grade) |
| Power Rating | 1/4W (0.25W) |
| Type | Carbon film (through-hole, axial) |
| Temperature Coefficient | ±200ppm/°C (typical for carbon film) |
| Operating Temperature | −55°C to +155°C |
| Colour Code | Brown-Red-Orange-Gold (12KΩ ±5%) |
| Pack Quantity | 25pcs |
| Certification | RoHS |
Colour Code Reference
| Band 1 | Band 2 | Band 3 (Multiplier) | Band 4 (Tolerance) | Value |
|---|---|---|---|---|
| Brown (1) | Red (2) | Orange (×1000) | Gold (±5%) | 12,000Ω = 12KΩ |
Typical Applications
- Pull-Up / Pull-Down: 12KΩ pull-up resistor on I²C SDA/SCL lines, GPIO inputs, and open-collector/open-drain outputs for reliable logic level definition
- Voltage Divider: 12KΩ resistor in voltage divider networks for ADC input scaling, battery voltage monitoring, and sensor signal conditioning
- RC Timing Circuit: 12KΩ resistor in RC timing circuits for NE555 timer, RC oscillator, and debounce filter applications
- LED Current Limiting: 12KΩ current-limiting resistor for very low-brightness LED indicator applications (e.g., 5V supply: I = (5−2) / 12000 = 0.25mA)
- Base Resistor: 12KΩ base resistor for NPN/PNP transistor switching circuits with low-current GPIO drive
FAQ
Q: What is the maximum voltage for a 1/4W 12KΩ resistor?
A: Maximum voltage = √(P × R) = √(0.25 × 12000) = 54.8V. Do not exceed this voltage across the resistor to avoid exceeding the power rating.
Q: Is 12KΩ a standard E24 resistor value?
A: Yes. 12KΩ is a standard E24 series value (12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91 × multiplier).
Package Contents
- 25 × 12KΩ 1/4W ±5% carbon film resistor (through-hole, axial)

Blog posts
View all-
Best JST Connector Crimping Tools in 2026: Engi...
Choosing the wrong crimping tool ruins JST connectors and wastes wire. This guide compares the top crimping tools for JST SH, GH, PH, XH, and VH series — including Engineer...
Best JST Connector Crimping Tools in 2026: Engi...
Choosing the wrong crimping tool ruins JST connectors and wastes wire. This guide compares the top crimping tools for JST SH, GH, PH, XH, and VH series — including Engineer...
-
Molex KK 254 vs Mini-Fit Jr. vs Micro-Fit 3.0: ...
Choosing between Molex KK 254, Mini-Fit Jr., and Micro-Fit 3.0? This guide compares pitch, current rating, locking mechanism, wire gauge, and typical applications — with decision tables, part number references,...
Molex KK 254 vs Mini-Fit Jr. vs Micro-Fit 3.0: ...
Choosing between Molex KK 254, Mini-Fit Jr., and Micro-Fit 3.0? This guide compares pitch, current rating, locking mechanism, wire gauge, and typical applications — with decision tables, part number references,...
-
DuPont Connector vs JST PH 2.0: Pinout, Specs &...
Not sure whether to use a DuPont 2.54mm or JST PH 2.0mm connector? This guide compares pitch, locking mechanism, current rating, pinout, and best use cases — so you can...
DuPont Connector vs JST PH 2.0: Pinout, Specs &...
Not sure whether to use a DuPont 2.54mm or JST PH 2.0mm connector? This guide compares pitch, locking mechanism, current rating, pinout, and best use cases — so you can...