Keszoox
SOP8 Programmer Test Clip 8-Pin Universal BIOS IC Adapter for Chip Programming
SOP8 Programmer Test Clip 8-Pin Universal BIOS IC Adapter for Chip Programming
Couldn't load pickup availability
SOP8 Programmer Test Clip — 8-Pin Universal BIOS IC Adapter for In-Circuit Programming
This SOP8/SOIC8 test clip provides a reliable in-circuit connection to 8-pin surface-mount ICs for BIOS recovery, EEPROM programming, and SPI NOR flash reading/writing — without desoldering the chip from the PCB. The spring-loaded contacts grip the IC leads firmly, and the ribbon cable connects to standard programmer modules (CH341A, TL866II Plus, XGecu T48).
Key Specifications
| Parameter | Value |
|---|---|
| Compatible Package | SOP8 / SOIC8 (8-pin SMD) |
| Contact Pitch | 1.27mm (SOIC8 standard) |
| Body Width | Narrow (3.9mm) and Wide (5.3mm) variants |
| Cable Length | ~20cm ribbon cable |
| Connector | 2.54mm DIP-8 female header (programmer side) |
| Contact Material | Gold-plated spring contacts |
| Compatible Programmers | CH341A, TL866II Plus, XGecu T48, Wellon VP-290 |
Narrow vs Wide Body
| Variant | IC Body Width | Common ICs |
|---|---|---|
| Narrow (3.9mm) | 3.9mm SOIC8 | W25Q32, AT24C02, 93C46, most EEPROMs |
| Wide (5.3mm) | 5.3mm SOIC8 | Some older BIOS chips, power ICs |
Why Choose This Test Clip?
- No Desoldering Required — Program chips in-circuit; saves time and prevents PCB damage
- Gold-Plated Contacts — Low contact resistance for reliable data transfer during programming
- Universal DIP-8 Output — Connects to any programmer with a DIP-8 ZIF socket or header
- Spring-Loaded Grip — Secure contact with IC leads without manual pressure during programming
- Wide Compatibility — Works with CH341A, TL866II Plus, XGecu T48, and most universal programmers
Compatible Chip Families
- SPI NOR Flash — W25Q32/64/128, MX25L series, GD25Q series (BIOS, router firmware)
- I2C EEPROM — AT24C02/04/08/256 (ECU, appliance settings)
- Microwire EEPROM — 93C46/56/66 (automotive, TV, set-top box)
- SPI EEPROM — 25AA/LC series
How to Use
- Power off the target PCB
- Align clip over the SOP8 IC (pin 1 indicator matches)
- Press clip down until contacts engage all 8 pins
- Connect ribbon cable to programmer DIP-8 socket
- Power programmer and read/write chip via software
FAQ
Q: Do I need to power off the target board when using this clip?
A: Yes — always power off the target board. The programmer supplies 3.3V to the chip via the clip. Leaving target power on causes conflicts and may damage the chip or programmer.
Q: How do I know which body width to choose?
A: Measure the IC body width (not including leads). Most modern SPI flash and EEPROM chips are narrow body (3.9mm). Older BIOS chips may be wide body (5.3mm).
Package Contents
- 1× SOP8/SOIC8 Programmer Test Clip with Ribbon Cable
- ★Product Description
- ★About us
- ★Custom cable
SOP8 Programmer Test Clip — 8-Pin Universal BIOS IC Adapter for In-Circuit Programming
This SOP8/SOIC8 test clip provides a reliable in-circuit connection to 8-pin surface-mount ICs for BIOS recovery, EEPROM programming, and SPI NOR flash reading/writing — without desoldering the chip from the PCB. The spring-loaded contacts grip the IC leads firmly, and the ribbon cable connects to standard programmer modules (CH341A, TL866II Plus, XGecu T48).
Key Specifications
| Parameter | Value |
|---|---|
| Compatible Package | SOP8 / SOIC8 (8-pin SMD) |
| Contact Pitch | 1.27mm (SOIC8 standard) |
| Body Width | Narrow (3.9mm) and Wide (5.3mm) variants |
| Cable Length | ~20cm ribbon cable |
| Connector | 2.54mm DIP-8 female header (programmer side) |
| Contact Material | Gold-plated spring contacts |
| Compatible Programmers | CH341A, TL866II Plus, XGecu T48, Wellon VP-290 |
Narrow vs Wide Body
| Variant | IC Body Width | Common ICs |
|---|---|---|
| Narrow (3.9mm) | 3.9mm SOIC8 | W25Q32, AT24C02, 93C46, most EEPROMs |
| Wide (5.3mm) | 5.3mm SOIC8 | Some older BIOS chips, power ICs |
Why Choose This Test Clip?
- No Desoldering Required — Program chips in-circuit; saves time and prevents PCB damage
- Gold-Plated Contacts — Low contact resistance for reliable data transfer during programming
- Universal DIP-8 Output — Connects to any programmer with a DIP-8 ZIF socket or header
- Spring-Loaded Grip — Secure contact with IC leads without manual pressure during programming
- Wide Compatibility — Works with CH341A, TL866II Plus, XGecu T48, and most universal programmers
Compatible Chip Families
- SPI NOR Flash — W25Q32/64/128, MX25L series, GD25Q series (BIOS, router firmware)
- I2C EEPROM — AT24C02/04/08/256 (ECU, appliance settings)
- Microwire EEPROM — 93C46/56/66 (automotive, TV, set-top box)
- SPI EEPROM — 25AA/LC series
How to Use
- Power off the target PCB
- Align clip over the SOP8 IC (pin 1 indicator matches)
- Press clip down until contacts engage all 8 pins
- Connect ribbon cable to programmer DIP-8 socket
- Power programmer and read/write chip via software
FAQ
Q: Do I need to power off the target board when using this clip?
A: Yes — always power off the target board. The programmer supplies 3.3V to the chip via the clip. Leaving target power on causes conflicts and may damage the chip or programmer.
Q: How do I know which body width to choose?
A: Measure the IC body width (not including leads). Most modern SPI flash and EEPROM chips are narrow body (3.9mm). Older BIOS chips may be wide body (5.3mm).
Package Contents
- 1× SOP8/SOIC8 Programmer Test Clip with Ribbon Cable
- ♥Hear From Our Happy Customers
- ♥Verified Buyer Reviews
- ♥Trusted by Professionals and Engineers
