Uno Acrylic Enclosure

DESCRIPTION This Uno acrylic enclosure fits the Arduino Uno R3 and compatible boards including both the standard...
Vendor: Keszoox
$1.29
$4.29
$1.29

Shipping

The shipping fee depends on your address

Standard: 9-15 business days,fee is down to $3.99

Express: 4-7 business days,fee is down to $5.99

Support Customization

WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.

If you're looking for a custom product, we can help. Kindly contact us via email support@keszoox.com and send us the details for your need, then we'll let you know how we can deliver the right solution.

Built And process your order

We make into production usually Within 1 - 3 Bussiness Days.

Expect customization orders.
Uno Acrylic Enclosure

Uno Acrylic Enclosure

$4.29 $1.29

Uno Acrylic Enclosure

$4.29 $1.29

DESCRIPTION

This Uno acrylic enclosure fits the Arduino Uno R3 and compatible boards including both the standard and SMD versions.  The enclosure helps to protect the board while still providing access to the connectors and reset button.

It comes with the 2.4mm thick acrylic pieces and the hardware required to assemble the case and to mount the Arduino Uno or compatible board inside the enclosure.  It does not come with the Uno board.

PACKAGE INCLUDES:

  • 6 Clear acrylic pieces
  • 4 sets of Arduino Uno mounting hardware
  • 4 sets of enclosure fastening hardware

OUR EVALUATION RESULTS:

These Uno acrylic enclosures do the job, but can be a bit fiddly to assemble.  Here are the basic steps to follow:

  1. Remove protective paper from acrylic pieces
  2. Place the Uno on the solid bottom piece and orient it so that the mounting holes line up so you know which way it goes.
  3. Insert the acrylic end piece that goes under the USB/DC jack into the bottom piece.
  4. Install the Uno board using the 4 short screws with acrylic washers under the board to space it up slightly.  This is the fiddly part.  You may find it easiest to insert the screws from the top or the bottom.  I put the screws in from the bottom and then put a piece of cardboard behind them to hold them in place so I can put the base down with the screws facing up.  Add acrylic washers and then put the board down over the screws.  Lastly add the nuts loosely to hold everything together and then tighten the screws.
  5. Install the 3 remaining side pieces and then the final top piece making sure all the tabs and slots  are lined up.
  6. Fasten the top to bottom pieces with the 4 long screws and 4 nuts.

Notes: 

  1. None

TECHNICAL SPECIFICATIONS

 Material  Clear acrylic
 Material Thickness  2.4mm (0.1″)
Case Dimensions (L x W x H)  80 x 65 x 18mm (3.15 x 2.56 x 0.7″)
Country of Origin China

WE'RE READY TO BUILD A CUSTOM PRODUCT FOR YOU.

Contact us:
Support@keszoox.com
What we can help:
If you're looking for a wire or cable assembly, we can help.
What we need your help next:
Kindly contact us via email support@keszoox.com and send us the details fo your need, then we'll let you know how we can deliver the right solution.

Shipping Policy

All orders are dispatched from our warehouse. The shipments are fully tracked—from our door to yours. Please allow 3-5 business days for your order to be processed in addition to the shipping times below.

Shipping Times

Standard: 9-15 business days. Express: 4-7 business days.

Please note that shipping providers are extremely busy during this time, and some orders might experience a delay on top of usual delivery times. If your order is late, please allow 5-10 days more than indicated in standard shipping times before contacting our customer service. Thank you for your understanding.

Tracking

All orders are 100% tracked. You’ll receive an email with a tracking number and a link to track your parcel once your order leaves our warehouse. Please allow 24-48 hours for the tracking link to start showing shipping information.

Related Products

Recently Viewed Products