USB Micro-B to 2.54mm Header Breakout

Adapter accepts a Micro-B style USB cable and converts to male header

DESCRIPTION

This is a USB Micro-B to 2.54mm (0.1″) header breakout adapter that can accept a Micro-B style USB cable.

PACKAGE INCLUDES:

• USB Micro-B to 2.54mm Header Adapter
• 1 x 5 male header

KEY FEATURES OF USB MICRO-B TO 2.54MM HEADER ADAPTER:

This connector is the same as you find on some Arduino boards, cell phones and similar small form factor equipment

These adapters ship with a strip of male header pins that can be soldered on.  The header can be soldered on the bottom of the adapter if you want to plug this into a breadboard.  If the header is soldered to the top of the adapter, female jumpers can be used to attach to the adapter.  Wires can also be soldered directly to the board if the header is not used.

These can be useful for implementing a physical USB port on a breadboard or to use it to bring in power from a computer or other USB port.  The board has 2 M3 size holes that can be used for mounting if desired.

Module Connections

The adapter brings out the 5 USB pins as listed below.  There are also 2 breakout pads available that connect to the connector shell.

1 x 5 Header

• VBUS = USB Power (4.75 – 5.25V)
• D- =        Data – (USB differential data line – )
• D+ =       Data + (USB differential data line +)
• ID =        USB OTG Identification
• GND =  Ground

Notes: 

1. None

TECHNICAL SPECIFICATIONS