3-Pin 1.2mm Waterproof Camshaft Speed Sensor Connector 7283-8730-30 MG641234-5 DJ7035A-1.2 Mitsubishi Nissan EVO

3-Pin 1.2mm Waterproof Camshaft & Speed Sensor Connector — 7283-8730-30 / MG641234-5 / DJ7035A-1.2

OEM-compatible Yazaki-spec 3-pin 1.2mm waterproof connector for Mitsubishi and Nissan camshaft position sensor (CMP) and vehicle speed sensor (VSS) wiring harnesses. Covers Mitsubishi MIVEC variable valve timing sensors and Lancer Evolution (EVO IV–X) engine management circuits — a critical connector for performance engine harness repair and restoration.

Specifications

Parameter	Value
Pin Count	3
Pitch	1.2 mm
OEM Part Numbers	7283-8730-30 / MG641234-5 / DJ7035A-1.2
Connector Family	Yazaki 1.2mm series
Housing Material	PA66 (Nylon 66)
Sealing	Rubber wire seal (waterproof)
Waterproof Rating	IP67
Operating Temperature	-40°C to +125°C
Application	Camshaft position sensor, vehicle speed sensor, MIVEC sensor
Certification	CE

Compatible Vehicles & Engines

• Mitsubishi Lancer Evolution IV–X (4G63T / 4B11T) — camshaft position sensor connector
• Mitsubishi Eclipse / Galant (4G63 / 4G64) — MIVEC camshaft sensor harness
• Mitsubishi Outlander / ASX (4B11 / 4J11) — speed and cam sensor wiring
• Nissan Silvia / 180SX / 200SX (SR20DET) — camshaft sensor connector
• Nissan Skyline GT-R (RB26DETT) — cam/crank sensor harness repair
• General Mitsubishi / Nissan vehicles using Yazaki 7283-8730-30 series connectors

Why Choose This Connector?

• ✅ 3 OEM cross-references: 7283-8730-30 / MG641234-5 / DJ7035A-1.2 — confirmed Mitsubishi & Nissan fitment
• ✅ Yazaki 1.2mm spec — OEM-accurate mating geometry for JDM vehicles
• ✅ IP67 rubber wire seal — protects against oil mist in high-performance engine bays
• ✅ 1.2mm ultra-compact pitch — fits tight sensor locations on MIVEC and turbo engines
• ✅ CE certified — meets EU automotive electrical standards

Application Scenarios

• MIVEC camshaft sensor connector replacement on Mitsubishi EVO IX / X (4G63T / 4B11T)
• Cam sensor harness repair on Nissan SR20DET during engine rebuild or swap
• Speed sensor connector restoration on Mitsubishi Outlander 4B11 after harness chafing
• Custom engine management harness build for EVO or SR20 swap into non-Mitsubishi/Nissan chassis

Comparison: Mitsubishi Cam/Speed Sensor Connectors

Part Number	Pitch	Application	Engine
7283-8730-30 / DJ7035A-1.2	1.2mm	CMP / VSS sensor	4G63T / 4B11T / SR20DET
PU465-03127 / DJ70393-2.2	2.2mm	Ignition coil (COP)	4G63 / 4G64 / 6G72
FW-C-D3F-B / DJ7038FA-2.3	2.3mm	Ignition coil (COP)	Subaru EJ20 / FA20

FAQ

Q: Is this connector compatible with Mitsubishi EVO 4G63T and 4B11T engines?
A: Yes. The 7283-8730-30 / MG641234-5 connector is used on both the 4G63T (EVO IV–IX) and 4B11T (EVO X) camshaft position sensor circuits. It is also used for MIVEC variable valve timing sensors on these engines.

Q: What is the difference between 7283-8730-30 and MG641234-5?
A: 7283-8730-30 is the Yazaki connector manufacturer part number. MG641234-5 is the Mitsubishi OEM part number for the same connector. They are identical housings — use either reference to confirm fitment.

Q: What terminals are compatible?
A: Yazaki 1.2mm series female terminals for 0.13–0.35mm² (AWG 26–22) wire. Terminals are sold separately.

Package Contents

• 1× 3-Pin 1.2mm Waterproof Connector Housing (7283-8730-30 / MG641234-5 / DJ7035A-1.2)
• Terminals not included

Enjoy free standard shipping on all orders over $199 USD. Orders are processed within 1–2 business days.

Not satisfied? Return any item within 90 days of purchase for a full refund or exchange. Items must be in original condition.

We are committed to quality, reliability, and customer satisfaction. Every product is carefully selected and tested to meet the highest standards.