250 Type 6.3mm Insulated Spade Terminal Cable Single-Head

250 Type 6.3mm Insulated Spade Terminal Cable — Single-Head

The 250 Type (6.3mm) insulated spade terminal cable is a pre-made wire assembly with a single-head spade terminal crimped onto one end. The 6.3mm tab width mates directly with 250-series (6.3mm) female quick-disconnect receptacles found on relays, fuse holders, solenoids, switches, and motor terminals. Available in 10 colors and lengths from 10cm to 100cm for flexible wiring harness assembly.

Key Specifications

Parameter	Value
Series	250 Type (6.3mm)
Terminal Type	Insulated Spade / Quick-Disconnect, Single-Head (male tab)
Tab Width	6.3mm
Conductor Material	Tinned copper
Insulation Material	PVC (color-coded sleeve)
Color Options	Red, Black, Blue, Yellow, White, Green, Orange, Grey, Purple, Brown
Length Options	10cm, 15cm, 20cm, 25cm, 30cm, 35cm, 40cm, 50cm, 80cm, 100cm
Quantity	1pc per order (select color and length)
Origin	CN

Why Choose 250 Type 6.3mm Spade Terminal Cables?

Industry-standard 6.3mm tab — Directly compatible with all 250-series female receptacles (Faston 250, AMP 250, Molex 250 equivalent) used in automotive and appliance OEM wiring
Pre-crimped, ready to use — No crimping tool required; terminal is factory-crimped for consistent, gas-tight connection quality
Tinned copper conductor — Resists oxidation in high-humidity and high-temperature environments; maintains low contact resistance over the product lifetime
PVC insulation sleeve — Provides electrical isolation and color-coded circuit identification; rated for standard automotive voltage (12V/24V DC)
10 colors × 10 lengths — Select the exact color and length needed for your wiring harness without cutting or crimping

Typical Applications

Automotive relay wiring (horn relays, fuel pump relays, headlight relays)
Fuse holder and fuse block terminal connections
Home appliance wiring (washing machine motors, dryer heating elements, dishwasher solenoids)
Motorcycle and ATV electrical system wiring
Industrial solenoid valve and contactor wiring
Marine and RV 12V/24V DC wiring harness assembly
Arduino and Raspberry Pi relay module wiring

Compatible With

Female receptacles: 250-series (6.3mm) insulated or non-insulated quick-disconnect receptacles
Equivalent to: Faston 250, AMP 250, TE Connectivity 250 series, Molex 250 series
Mating connectors: automotive relay bases, fuse holders, solenoid terminals, switch terminals

Frequently Asked Questions

Q: What is the difference between 187 type (4.8mm) and 250 type (6.3mm) spade terminals?

The numbers refer to the tab width in thousandths of an inch: 187 type = 4.75mm tab, 250 type = 6.35mm tab. The 250 type is larger and rated for higher current applications (typically up to 15–20A). They are not interchangeable — always match the terminal size to the mating receptacle.

Q: Is this a single wire or a pack?

Each order is for 1 piece — one wire with a single spade terminal crimped on one end. Select your required color and length from the variant options. Order multiple quantities if you need more than one.

Q: Can I use these cables for 240V AC appliance wiring?

These cables are designed for low-voltage DC automotive and appliance applications (12V/24V). For 240V AC mains wiring, use cables and terminals rated and certified for mains voltage (e.g., VDE-approved). The PVC insulation on these cables is not rated for mains voltage applications.