Keszoox
JST PH 2.0mm Connector Kit — Male & Female Housing Set with 22AWG Pre-Crimped Wires, 2–10 Pin
JST PH 2.0mm Connector Kit Male & Female Housing Set with 22AWG Pre-Crimped Wires, 2–10 Pin
Couldn't load pickup availability
JST PH 2.0mm Connector Kit — Male & Female Housing Set with 22AWG Pre-Crimped Wires, 2–10 Pin
A comprehensive JST PH 2.0mm connector kit covering 2P to 10P configurations with both male plug and female receptacle housings and 22AWG pre-crimped wire assemblies. The JST PH 2.0mm (PHR series) is the global standard for LiPo battery balance leads, RC model wiring, and Arduino wire-to-board connections. Rated 2A / 100V AC/DC with SPH-002T-P0.5 contacts. This kit is the go-to solution for engineers and makers who need a complete, ready-to-use JST PH 2.0mm assortment.
Why Choose This Kit?
- ✅ JST PH 2.0mm (PHR) standard — the universal LiPo battery balance connector and Arduino wire-to-board standard
- ✅ 2P to 10P pin counts — covers the full range of common JST PH configurations
- ✅ Male & female housings included — complete wire-to-wire and wire-to-board connection solution
- ✅ 22AWG pre-crimped cables — ready to insert, no crimping tool required
- ✅ SPH-002T-P0.5 contact — phosphor bronze, tin-plated, 2A / 100V AC/DC rated
- ✅ RoHS2 compliant — PA nylon housing, tin-plated copper contacts
Key Specifications
- Series: JST PH (PHR) | Pitch: 2.0mm | Pin counts: 2P–10P
- Contact: SPH-002T-P0.5 | Wire: 22AWG | Current: 2A | Voltage: 100V AC/DC | Compliance: RoHS2
Typical Applications
- LiPo battery balance leads for RC models, drones and FPV aircraft
- Arduino and development board wire-to-board connections
- Robotics and servo signal wiring
- Portable electronics and wearable device battery connections
- DIY electronics prototyping and repair
- ★Product Description
- ★About us
- ★Custom cable
JST PH 2.0mm Connector Kit — Male & Female Housing Set with 22AWG Pre-Crimped Wires, 2–10 Pin
A comprehensive JST PH 2.0mm connector kit covering 2P to 10P configurations with both male plug and female receptacle housings and 22AWG pre-crimped wire assemblies. The JST PH 2.0mm (PHR series) is the global standard for LiPo battery balance leads, RC model wiring, and Arduino wire-to-board connections. Rated 2A / 100V AC/DC with SPH-002T-P0.5 contacts. This kit is the go-to solution for engineers and makers who need a complete, ready-to-use JST PH 2.0mm assortment.
Why Choose This Kit?
- ✅ JST PH 2.0mm (PHR) standard — the universal LiPo battery balance connector and Arduino wire-to-board standard
- ✅ 2P to 10P pin counts — covers the full range of common JST PH configurations
- ✅ Male & female housings included — complete wire-to-wire and wire-to-board connection solution
- ✅ 22AWG pre-crimped cables — ready to insert, no crimping tool required
- ✅ SPH-002T-P0.5 contact — phosphor bronze, tin-plated, 2A / 100V AC/DC rated
- ✅ RoHS2 compliant — PA nylon housing, tin-plated copper contacts
Key Specifications
- Series: JST PH (PHR) | Pitch: 2.0mm | Pin counts: 2P–10P
- Contact: SPH-002T-P0.5 | Wire: 22AWG | Current: 2A | Voltage: 100V AC/DC | Compliance: RoHS2
Typical Applications
- LiPo battery balance leads for RC models, drones and FPV aircraft
- Arduino and development board wire-to-board connections
- Robotics and servo signal wiring
- Portable electronics and wearable device battery connections
- DIY electronics prototyping and repair
