Keszoox
JST XH to Dupont 2.54mm Adapter Connector Kit with 22AWG Pre-Crimped Cables
JST XH to Dupont 2.54mm Adapter Connector Kit with 22AWG Pre-Crimped Cables
Couldn't load pickup availability
JST XH to Dupont 2.54mm Adapter Connector Kit with 22AWG Pre-Crimped Cables
Bridge JST-XH 2.54mm connectors and standard Dupont 2.54mm headers in one kit. The ideal solution for makers and engineers who need to connect JST-XH battery balance leads, 3D printer boards, or RC electronics directly to Arduino GPIO headers, breadboards, and standard 2.54mm PCB layouts — without custom wiring or soldering.
Includes JST-XH and Dupont 2.54mm male and female housings in assorted pin counts, plus 22AWG pre-crimped cable assemblies — ready to assemble, no crimping tool required.
Why Choose This Kit?
- ✅ JST-XH + Dupont 2.54mm in one kit — bridges the two most common 2.54mm pitch connector standards
- ✅ Pre-crimped 22AWG cables included — ready to insert, no crimping tool required
- ✅ Male & female housings — complete set for building or repairing adapter harnesses
- ✅ Assorted pin counts — covers the most common configurations for prototyping and adapter wiring
- ✅ Wire rating: 3A / 300V / 80°C — suitable for signal and low-power wiring
- ✅ RoHS compliant — PA nylon housing, tin-plated copper contacts
Kit Contents
- JST-XH 2.54mm Housings — male & female, assorted pin counts
- Dupont 2.54mm Housings — male & female, assorted pin counts
- 22AWG Pre-Crimped Cable Assemblies — assorted pin counts, 3A / 300V / 80°C rated
Key Specifications
- Connector types: JST-XH 2.54mm + Dupont 2.54mm
- Cable: 22AWG | Wire rating: 3A / 300V / 80°C
- Housing: PA nylon | Contact: tin-plated copper
- Compliance: RoHS compliant
Typical Applications
- LiPo battery balance lead to Arduino/breadboard adapter wiring
- 3D printer board to Dupont header adapter connections
- RC electronics to standard 2.54mm development board wiring
- Prototyping lab adapter harness assembly
- DIY electronics harness building and repair
- ★Product Description
- ★About us
- ★Custom cable
JST XH to Dupont 2.54mm Adapter Connector Kit with 22AWG Pre-Crimped Cables
Bridge JST-XH 2.54mm connectors and standard Dupont 2.54mm headers in one kit. The ideal solution for makers and engineers who need to connect JST-XH battery balance leads, 3D printer boards, or RC electronics directly to Arduino GPIO headers, breadboards, and standard 2.54mm PCB layouts — without custom wiring or soldering.
Includes JST-XH and Dupont 2.54mm male and female housings in assorted pin counts, plus 22AWG pre-crimped cable assemblies — ready to assemble, no crimping tool required.
Why Choose This Kit?
- ✅ JST-XH + Dupont 2.54mm in one kit — bridges the two most common 2.54mm pitch connector standards
- ✅ Pre-crimped 22AWG cables included — ready to insert, no crimping tool required
- ✅ Male & female housings — complete set for building or repairing adapter harnesses
- ✅ Assorted pin counts — covers the most common configurations for prototyping and adapter wiring
- ✅ Wire rating: 3A / 300V / 80°C — suitable for signal and low-power wiring
- ✅ RoHS compliant — PA nylon housing, tin-plated copper contacts
Kit Contents
- JST-XH 2.54mm Housings — male & female, assorted pin counts
- Dupont 2.54mm Housings — male & female, assorted pin counts
- 22AWG Pre-Crimped Cable Assemblies — assorted pin counts, 3A / 300V / 80°C rated
Key Specifications
- Connector types: JST-XH 2.54mm + Dupont 2.54mm
- Cable: 22AWG | Wire rating: 3A / 300V / 80°C
- Housing: PA nylon | Contact: tin-plated copper
- Compliance: RoHS compliant
Typical Applications
- LiPo battery balance lead to Arduino/breadboard adapter wiring
- 3D printer board to Dupont header adapter connections
- RC electronics to standard 2.54mm development board wiring
- Prototyping lab adapter harness assembly
- DIY electronics harness building and repair
